BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
-
BrandBBI
-
Manufacturer Part Number489114
-
CountryUSA|Canada
-
FinishZinc CR+3
-
Tensile Strength60000 psi
-
MaterialLow Carbon Steel
-
Material SpecificationASTM A307
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypeFully Threaded
-
GradeA
-
HardnessB70 to B100
-
Neck Size0.281 in
-
Neck TypeSquare
-
Head Diameter1.094 in
-
Head TypeRound
-
Diameter - Thread Size1/2-13
-
Drive Size0.515 in
-
Drive TypeSquare
-
Length Under Head2 in
-
UNSPSC31161603
-
Package Description50/CS
-
Standards/ApprovalsANSI/ASME B18.5
-
Catalog
Recently Viewed
BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.
Milwaukee® 23-66-0020 Switch, For Use With 6175 14 in Cut-Off Machine
6 X 3 BLACK BUTT WELD REDUCER - FIT6X3BWR>
CONSOLIDATED BRG MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
CONS MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
Milwaukee® 49-57-8215 Quick-Change Hole Saw Cutter, 1-1/8 in Dia, 1/2 in D Cutting, Carbide Cutting Edge
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.
