POWERS 3/8" X 2-1/2" WEDGE BOLT ANCHORS PWR 7222
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
-
BrandDeWALT®
-
UPC075352304960
-
Manufacturer Part NumberPFM1411220
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength2630/2880/3300/4075 lb
-
MaterialSteel
-
Maximum Work Thickness1 in
-
Minimum Embedment Depth1-1/2 in
-
TypeHigh Performance
-
Head Drive TypeHex
-
Head Size9/16 in
-
Applicable MaterialsNormal Weight Concrete/Sand Lightweight Concrete/Concrete Over Steel Deck/Concrete Masonry/Solid Clay Brick
-
Shear Strength3550/3890/4490/5500/6355 lb
-
Diameter3/8 in
-
Drill Size3/8 in
-
Overall Length2-1/2 in
- Designed for standard ANSI tolerance drill bits
- Tough threads for tapping high strength concrete
- Can be installed closer to the edge than traditional expansion anchors
- Fast installation with powered impact wrench
- 1-piece, finished head design
- Patented thread design offers low installation torque
- Ratchet teeth on underside of hex washer head lock against the fixture
- Fully removable and re-installable in same hole
- Diameter, length and identifying marking stamped on head of each anchor
- 3550/3890/4490/5500/6355 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete shear strength
- 2630/2880/3300/4075/4075 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete tensile strength
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 11572547 |
-
UNSPSC31162104
-
Standards/ApprovalsICC-ES ESR-3889|ICC-ES ESR-4042|2015 IBC|2015 IRC|2012 IBC|2012 IRC|2009 IBC|2009 IRC|ACI 355.2|ICC-ES AC193
-
Instruction/Installation Manual
-
Specification Sheet
-
Technical Bulletin
Recently Viewed
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
LINEAR BEARING GUIDE - NSKLAW21EL20>
ALAN 14-THHN BLUE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNBLU >
SOCKET WELD ELBOW
Elmer’s No-Wrinkle Rubber Cement provides the perfect solution for adhering photos and detailed cut-and-paste projects. Featuring a brush applicator and smooth formula, the rubber cement applies quickly and fluidly. Excess glue rubs off cleanly and shows no wrinkles as it dries! What’s more, the Elmer’s glue is acid free and photo safe.
