metabo® 623479000 Coated Abrasive Flap Wheel, 4 in Dia, 4 in W Face, P80 Grit, Coarse Grade, Aluminum Oxide Abrasive
metabo® 623479000 Coated Abrasive Flap Wheel, 4 in Dia, 4 in W Face, P80 Grit, Coarse Grade, Aluminum Oxide Abrasive
-
Brandmetabo®
-
Manufacturer Part Number623479000
-
CountryUSA
-
Face Width4 in
-
Maximum Speed5800 rpm
-
GradeCoarse
-
GritP80
-
Abrasive MaterialAluminum Oxide
-
Wheel Diameter4 in
- Maximum speed 5,800 /min, recommended speed 3,200 /min
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 28CR23 |
-
UNSPSC31191600
Recently Viewed
metabo® 623479000 Coated Abrasive Flap Wheel, 4 in Dia, 4 in W Face, P80 Grit, Coarse Grade, Aluminum Oxide Abrasive
metabo® 623479000 Coated Abrasive Flap Wheel, 4 in Dia, 4 in W Face, P80 Grit, Coarse Grade, Aluminum Oxide Abrasive
1-1/4" -FEMALE PIPE THREAD 90-DEGREE METAL GALVANIZED ELBOW-JPW11/4GE >
741567 DO-IT-BEST/MIDWEST AIR TECH 6" X 44" RED STEEL SCREW-IN EARTH ANCHOR
SCREW INTO THE GROUND TO HOLD DOWN TENTS, CANOPIES, STORAGE BUILDINGS, FENCING, PLAYGROUND EQUIPMENT, TREES, PLANES, AS WELL AS HUNDREDS OF OTHER USES. NOT FOR USE ON MANUFACTURED HOMES.
-JWH741567>
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
50 PIECE 5/32" HAIR PIN CLIP-JWH736500 >
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
