POWERS 1/2" X 2-3/4" Mushroom Head Masonry Spike PWR-5569
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
-
BrandDeWALT®
-
UPC075352055695
-
Manufacturer Part Number05569-PWR
-
CountryUSA|Canada
-
FinishZinc Plated
-
MaterialCarbon Steel
-
Minimum Embedment Depth2-1/2 in
-
Type1-Piece
-
Head Size1 in OD x 1/4 in H
-
Head TypeMushroom
-
Hole Diameter9/16 in
-
Diameter1/2 in
-
Drill Size1/2 in
-
Overall Length2-3/4 in
- Pre-expanded anchor design allows for easy installation
- Forming Spike, which is removable, can be used for temporary installations
- Mushroom and flat head Spike anchors are tamperproof
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening
-
Alternative Part Number15601100
-
UNSPSC31162100
-
IDEA Index ID15601100
-
Standards/ApprovalsAC01|AISI 1038|ASTM B633, SC1, Type III (Fe/Zn5)|ASTM E488
-
Specification Sheet
Recently Viewed
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
Dixon® 1021612C 102 Standard Insert, 3/4 x 1 in Nominal, MNPT x Hose Barb End Style, Brass, Domestic
Dixon® 1021612C 102 Standard Insert, 3/4 x 1 in Nominal, MNPT x Hose Barb End Style, Brass, Domestic
BrassCraft® ProCoat® CSSTNN-22N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 22 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
HCI Preferred Supplier 18224B 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Compression x MNPTF End Style, CA360 Brass
HCI Preferred Supplier 18224 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Compression x MNPTF End Style, CA377 Brass
Coilhose® 6-252V Moldflow Pipe Connector, 1/4 in x 1/4-18 Nominal, MPT End Style, Brass, Domestic
The Moldflow series of couplers and connectors is designed primarily for use in cooling injection molds. They are available in valved or unvalved configurations. Engineered to interchange with other manufactures, these couplers and connectors are made from high quality brass with stainless steel balls, stainless steel valves and springs, and silicone seals.
