Dixon® 1021612C 102 Standard Insert, 3/4 x 1 in Nominal, MNPT x Hose Barb End Style, Brass, Domestic
Dixon® 1021612C 102 Standard Insert, 3/4 x 1 in Nominal, MNPT x Hose Barb End Style, Brass, Domestic
-
BrandDixon®
-
UPC089109710942
-
Manufacturer Part Number1021612C
-
CountryUSA
-
MaterialBrass
-
Fitting/Connector TypeAdapter
-
TypeStandard
-
Nominal Size3/4 x 1 in
-
Dimensions1 in ID Hose
-
Domestic/ImportDomestic
-
End StyleMNPT x Hose Barb
-
Temperature Rating-40 to 160 deg F
-
Pressure Rating150 psi
-
Number of Barb5
-
Hex Size1-1/16 in
-
Series102
-
Barb Length1.19 in
-
Length2-1/16 in
- All standard hose fittings are intended for use with hose clamps or crimped ferrules
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
- 5 barbs
- 7/32 in W hex
- 1-1/32 in Dia barb
- Fixed fitting swivel torque
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Barbed fitting for a tight seal on hoses
- Dryseal construction
-
UNSPSC40141734
-
Package Description20/BX
-
Alternative Part NumberBN86|102-1612
-
WarrantyLimited
-
Catalog
-
Specification Sheet
Recently Viewed
Dixon® 1021612C 102 Standard Insert, 3/4 x 1 in Nominal, MNPT x Hose Barb End Style, Brass, Domestic
Dixon® 1021612C 102 Standard Insert, 3/4 x 1 in Nominal, MNPT x Hose Barb End Style, Brass, Domestic
BrassCraft® ProCoat® CSSTNN-22N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 22 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
HCI Preferred Supplier 18224B 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Compression x MNPTF End Style, CA360 Brass
HCI Preferred Supplier 18224 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Compression x MNPTF End Style, CA377 Brass
Coilhose® 6-252V Moldflow Pipe Connector, 1/4 in x 1/4-18 Nominal, MPT End Style, Brass, Domestic
The Moldflow series of couplers and connectors is designed primarily for use in cooling injection molds. They are available in valved or unvalved configurations. Engineered to interchange with other manufactures, these couplers and connectors are made from high quality brass with stainless steel balls, stainless steel valves and springs, and silicone seals.
