POWERS 3/16" X 4" MUSH/HD MASONRY SPIKES PWR 5512
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
-
BrandDeWALT®
-
UPC075352055121
-
Manufacturer Part Number05512-PWR
-
CountryUSA|Canada
-
FinishZinc Plated
-
MaterialCarbon Steel
-
Minimum Embedment Depth1-1/4 in
-
Type1-Piece
-
Head Size7/16 in OD x 7/64 in H
-
Head TypeMushroom
-
Hole Diameter1/4 in
-
Diameter3/16 in
-
Drill Size3/16 in
-
Overall Length4 in
- Pre-expanded anchor design allows for easy installation
- Forming Spike®, which is removable, can be used for temporary installations
- Mushroom and flat head Spike® anchors are tamperproof
- Pipe and tie-wire Spike® is a simple to install alternative to direct fastening (e.g. powder actuated)
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2141123 |
-
UNSPSC31162100
-
Standards/ApprovalsAC01|AISI 1038|ASTM B633, SC1, Type III (Fe/Zn5)|ASTM E488
-
Specification Sheet
Recently Viewed
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
HCI Preferred Supplier 18224B 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Compression x MNPTF End Style, CA360 Brass
HCI Preferred Supplier 18224 90 deg Tube-to-Pipe Elbow, 1/4 x 1/8 in Nominal, Compression x MNPTF End Style, CA377 Brass
Coilhose® 6-252V Moldflow Pipe Connector, 1/4 in x 1/4-18 Nominal, MPT End Style, Brass, Domestic
The Moldflow series of couplers and connectors is designed primarily for use in cooling injection molds. They are available in valved or unvalved configurations. Engineered to interchange with other manufactures, these couplers and connectors are made from high quality brass with stainless steel balls, stainless steel valves and springs, and silicone seals.
HCI Preferred Supplier 20030P Union Tee, 1/2 in Nominal, Push-In, Plastic
HCI Preferred Supplier 18221B 90 deg Tube-to-Pipe Elbow, 3/16 x 1/8 in Nominal, Compression x MNPTF End Style, CA360 Brass
HCI Preferred Supplier 18221B 90 deg Tube-to-Pipe Elbow, 3/16 x 1/8 in Nominal, Compression x MNPTF End Style, CA360 Brass
