Starrett 6" TAP WRENCHES STR 93-D
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 150mm (6") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
-
BrandStarrett®
-
UPC049659504309
-
Manufacturer Part Number93D
-
CountryUSA|Canada
-
Handle TypeT-Handle
-
Series93 Series
-
Length6 in
-
Tap Capacity1/16 to 3/16 in
- For holding taps, drills, reamers and small tools to be turned by hand
- Designed to hold square shanks
- Properly heat treated to withstand ordinary shop use
- Body is centered for use on lathe centers or upright drilling machines to start tap straight
- Jaws conform to the tool being held and are heat treated
- Wrenches have sliding handle which is frictionally held
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 58695404 |
| Grainger | 30C245 |
-
Alternative Part Number50430
-
UNSPSC27111720
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
-
Full Engineering Drawing
Recently Viewed
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 150mm (6") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
48X96X1/4" LEXAN/POLYCARBONATE BRAND SHEET-CPI4X8X1/4LEXAN/POLYCARBONATE >
Browning® 1296573 T65L Automatic Torque Limiter, 1-7/16 in Finished Bore, 6-1/2 in OD, 4800 in-lb (1-Spring)/8800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
SPRING JD CORN HEAD-KABP61703>
A 2" x 6" Schedule 80 PVC Pipe Nipple used in high-pressure plumbing and irrigation systems.
Gates 5-VW-1600 Industrial V-Belts - 5VX Section, 5/8 in Top Width, 1 Strand, 160.0000 in Nominal Outside Length, Cogged
Finding a belt that fits into your compact machinery without sacrificing power or efficiency is a daily challenge. When every inch of space is precious and traditional belts just don't cut it, the Super HC Molded Notch (MN) V-belt is your solution. This bandless, high-performance belt, crafted from ethylene elastomer with precision-molded notches, provides superior cord support and flexibility to improve load distribution and reduce maintenance needs. Whether you aim to boost your drive efficiency or minimize downtime, Gates Super HC MN V-belts deliver the durability and performance to keep your industrial processes running smoothly.
