Tap Wrenches

Adjustable straight handle tap wrenches have one threaded handle which is attached to one of the clamps. The clamp is opened to insert the tool and then tightened down against the tool to secure it. Used with larger taps, reamers or screw extractors.

GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.

GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.

GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.

GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.

GENERAL® 160R Reversible Tap Wrench, #0-8 Tap, Ratcheting, Hardened Steel, 2-3/4 in L, Sliding T-Handle Handle

GENERAL® 161R Reversible Tap Wrench, #0 to 1/4 in Tap, Ratcheting, Hardened Steel, 3-1/2 in L, Sliding T-Handle Handle

GENERAL® 162R Reversible Tap Wrench, #12 to 1/2 in Tap, Ratcheting, Hardened Steel, 4-1/4 in L, Sliding T-Handle Handle

GENERAL® 164 Plain Tap Wrench, #0 to 1/4 in Tap, Steel, 2-7/8 in L, Sliding T-Handle Handle

GENERAL® 166 Plain Tap Wrench, #12 to 1/2 in Tap, Steel, 3-3/4 in L, Sliding T-Handle Handle

The IRWIN HANSON T-Handle Tap Wrench is designed for use with taps and on many other tools to be turned by hand. The T-Handle may be extended to full length in either direction for more leverage.

The IRWIN HANSON Adjustable Tap Handle & Reamer Wrench uses a straight-handle design to provide greater leverage, especially when using larger-diameter taps. This tap wrench is designed for use with taps, reamers, screw extractors and other tools with a square shank.

Irwin® Hanson® 12415 Tap Wrench, #12 to 5/16 in Tap, Steel, T-Handle Handle

Irwin® Hanson® 12421 Adjustable Wrench, #0 to 1/2 in Tap, Steel, Offset/Straight Handle

This IRWIN HANSON Adjustable Tap Handle and Reamer Wrench uses a straight-handle design to provide greater leverage, especially when using larger-diameter taps. This tap wrench is designed for use with taps, reamers, screw extractors and other tools with a square shank.

MORSE® 30501 1148 Tap Wrench, 1/16 to 1/4 in Tap, 7 in L, Black Oxide

MORSE® 30502 1148 Tap Wrench, 1/16 to 3/8 in Tap, 9 in L, Black Oxide

MORSE® 30503 1148 Tap Wrench, 5/32 to 1/2 in Tap, 12 in L, Black Oxide

MORSE® 30504 1148 Tap Wrench, 5/32 to 3/4 in Tap, 15 in L, Black Oxide

MORSE® 30505 1148 Tap Wrench, 1/4 to 1-1/8 in Tap, 18 in L, Black Oxide

The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.