Roughing & Finishing End Mills
Drillco 51A216E 5100A Imperial Multi-Flute Non-Center Cutting Regular Length Single End Finishing End Mill, 1-1/4 in Dia Cutter, 2 in Length of Cut, 6 Flutes, 7/8 in Dia Shank, 4-1/2 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 55A124A 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 55A128B 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 55A132B 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 55A148D 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-5/8 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 670A132B 6700A Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 670A148D 6700A Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 672A124A 6725A Center Cutting Imperial Medium Length Single End Finishing End Mill, 3/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 675A148D 6750A Center Cutting Imperial Long Length Single End Finishing End Mill, 3/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 690A108A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 690A112A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/16 in Dia Cutter, 7/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 690A116A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/4 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-3/8 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 690A120A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 5/16 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 690A124A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/8 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 695A108A 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 695A112A 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 695A116A 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-3/8 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 695A120A 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 695A124A 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 695A132B 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 695A148D 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-5/8 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 72A104C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A108C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A112C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Recently Viewed
DRILLCO 1000N133 Imperial Silver and Deming Drill, 33/64 in Drill - Fraction, 0.5156 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
Drillco 1000EF157 Imperial Silver and Deming Drill, 57/64 in Drill - Fraction, 0.8906 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Reed 05610 R12+ Segmental Die, 1 in NPT Thread, Right Thread, 4 Pieces, HSS
REED knows how to cut a good thread and high speed steel (HSS) R12+ Segmental Dies show this with cutting edges manufactured in-house by precision CNC machinery. The 1/2" through 2" die segments are available in NPT. The segmental die design enables smooth chip flow and easy cutting. R12+ die sets are replaceable parts for REED R12+ Dropheads, as well as the following RIDGID® dropheads: 12-R, 00-R, 111-R, 0-R, 11-R, 30A and 31A threaders. Segmental dies are sold in full sets of four.NOTE: Available only in right-hand configuration.
DRILLCO 1000N136 Imperial Silver and Deming Drill, 9/16 in Drill - Fraction, 0.5625 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N144 Imperial Silver and Deming Drill, 11/16 in Drill - Fraction, 0.6875 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
Drillco 1000F232 Imperial Silver and Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000F series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
