MORSE C/Tool 20-MM X 2.50 HAND PLUG TAPS MCT 58032
MORSE® 58032 5944 Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
-
BrandMORSE®
-
UPC686125580322
-
Manufacturer Part Number58032
-
CountryUSA
-
FinishBright
-
MaterialSolid Micrograin Carbide
-
Flute TypeSpiral
-
TypeCenter Cutting Regular Length Single End
-
Helix Angle30 deg
-
Series5944
-
Cutter Diameter1/2 in
-
Shank Diameter1/2 in
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Shank TypePlain/Round
-
Length of Cut1 in
-
Overall Length3 in
- 2-flute end mills provide increased chip capacity for higher feed rates
- Recommended for easy-to-machine materials including low alloy steels, non-ferrous materials and cast iron
- Center cutting end allows for plunge cutting like a drill into solid material
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3258032 |
-
UNSPSC23242511
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 58032 5944 Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
Browning® 1045517 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
United Abrasives-SAIT Saitlam F™ 73980 Close High Performance Coated Abrasive Flap Disc, 4-1/2 in Dia, 7/8 in Center Hole, 80 Grit, Medium Grade, Zirconia Alumina Abrasive, Type 29 Conical Disc
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
2" SCHEDULE-80 CPVC L/R SOCKET FLANGE - NIB1854020>
Pyramex® STO4310D Safety Eyewear, Anti-Scratch, Clear Lens, Orange, Plastic Frame, Polycarbonate Lens, ANSI Z87.1
