ITM C/Tools 1/8" JOBBERS COBALT DRILLBITS ITM 219-CO-0864
ITM 219CO0864 Heavy Duty Drill Bit, 1/8 in Drill - Fraction, 0.1250 Drill - Decimal Inch, 135 deg Point Angle, M35 Cobalt, Gold
-
BrandITM
-
UPC703652450048
-
Manufacturer Part Number219CO0864
-
CountryUSA
-
FinishGold
-
MaterialM35 Cobalt
-
Flute Length1-5/8 in
-
Flute TypeGround
-
Applicable MaterialsHard Steel/Stainless/Cast Iron
-
Drill Size - Decimal Inch0.125
-
Drill Size - Fraction1/8 in
- Cobalt Jobber Drills
-
Catalog
Recently Viewed
ITM 219CO0864 Heavy Duty Drill Bit, 1/8 in Drill - Fraction, 0.1250 Drill - Decimal Inch, 135 deg Point Angle, M35 Cobalt, Gold
Armstrong® 26-121 Regular Length Open End Wrench, 3/4 x 13/16 in Wrench, 15 deg Offset, 8.68 in L, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 26-121 Regular Length Open End Wrench, 3/4 x 13/16 in Wrench, 15 deg Offset, 8.68 in L, High Alloy Steel, Polished Chrome, ASME B107.6-1994
POWERBLOCK END AND INTEGRATED RESETTABLE CIRCUIT BREAKER. IMMEDIATELY PROVIDES CIRCUIT BREAKER PROTECTION WHERE NONE MAY BE AVAILABLE. CUTS OFF POWER DUE TO ACCIDENTAL SHORTS, PROTECTS CORD FROM EQUIPMENT OVERLOAD.
- JWH528404 >
Littelfuse® POWR-GARD® KLSR020 Current Limiting High Speed North American Style Fast Acting Fuse, 20 A, 600 V AC/250 V DC, 200/20 kA Interrupt, RK1 Class, Cartridge Body
KLSR series RK1 fuses were the earliest type of current limiting fuse developed. Their single element, silver link design enables them to provide fast acting overload and short circuit protection. When used to protect inductive loads such as motors, solenoids and transformers, KLSR series fuses must be greatly oversized to prevent opening the fuses on harmless inrush currents. In such applications, KLSR series fuses may only provide short circuit protection.
3/4" X 1" USS SOCKET SET SCREWS-NBS7190750100 >
The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 4" (100mm) Length, 1/8" (3mm) Point Diameter.
