Browning 16-TOOTH MPB #80-1 CHAIN SPROCKETS BRW 80-B-16
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289180257
-
Manufacturer Part Number1123603
-
CountryUSA
-
Pitch1 in
-
Pitch Diameter5.126 in
-
MaterialSteel
-
Chain Size#80
-
TypeSingle Strand Minimum Bore Type B
-
Hub Diameter4 in
-
Number of Teeth16
-
Keyway Size5/8 x 5/16 in
-
Outside Diameter5.63 in
-
Length Through Bore1-1/2 in
-
Bore Diameter1 in
- Larger hub diameter allows larger bore capacity
- Lasts longer than sprockets made from low carbon steel
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- Hub is recessed for chain clearance
- For use with 1 in pitch ANSI chain
-
Alternative Part Number80B16
-
UNSPSC31171900
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
36 TOOTH 8-MM-PITCH TIMING BELT SHEAVES-IDCP368M85 >
Dichtomatik 67004496 O-Ring, 70 mm ID x 78 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
3/8" X 1/2" Round Head Slot Machine Screws
SINGLE GROOVE VARIABLE PITCH SHEAVES 62X1-1/8 -BRW1VP62X11/8 >
1" X 1/2" CONICAL SHAPED MOUNTED ROTARY FILE WITH ROUNDED END WITH 1/4" SHANK. CARDED MAXRPG: 2.500. SHANK MOUNTED ROTARY FILES ARE ROUGH, RUGGED TOOLS MADE FROM SPECIAL TEMPERED STEEL-FOR60074 >
