Southwire® Titan2® 55094003 Type LTM-EF Liquid Tight Flexible Metal Conduit, 3/4 in Trade, 0.82 to 0.84 in ID x 1.03 to 1.05 in OD, 100 ft L, Aluminum/Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
-
BrandSouthwire®
-
UPC032886042478
-
Manufacturer Part Number55094003
-
CountryUSA
-
Temperature Rating14 to 140 deg F
-
FinishGalvanized
-
MaterialAluminum/Steel
-
Trade Size3/4 in
-
ColorGray
-
TypeType LTM-EF
-
Inside Diameter0.82 to 0.84 in
-
Bend Radius5 in
-
Outside Diameter1.03 to 1.05 in
-
Length100 ft
- Delivers wiring protection where listed products are not required
- For exposed or concealed installations requiring movement crossover connections or tight bends
- Requires standard liquid-tight fittings
- Delivers wiring protection where listed products are not required
- Seals out abrasives, alcohol, coolants, corrosive fumes and gases, dirt, grease, mineral acids, non-concentrated fixed alkalines, petroleum oils, salt air spray, water and weather
- For exposed or concealed installations requiring movement, crossover connections, or tight bends
- Oil resistant, sunlight resistant
- Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel
- A flame retardant, flexible PVC jacket is extruded over the metal core
- The gray jacket resists oils, mild acids and exposure to sunlight
-
Alternative Part Number8872078
-
UNSPSC39131706
-
IDEA Index ID8872078
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|NEC Article 350|PROP65: This product contains material that,the State of California has determined|may cause reproductive harm. www.p65warnings.ca.gov/product
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Southwire® Titan2® 55094003 Type LTM-EF Liquid Tight Flexible Metal Conduit, 3/4 in Trade, 0.82 to 0.84 in ID x 1.03 to 1.05 in OD, 100 ft L, Aluminum/Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
LARGE TYVEK COVERALL WITH PLAIN WRIST & ANKLE - TVKTY120SWHLG>
Sealmaster® 701245 FB Series Non-Expansion Round Straight Standard-Duty Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 2 in OAL/Dia
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
HCI Preferred Supplier FSO24042424 Straight Hydraulic Adapter, 2-12 x 1-1/2 in Nominal, Male O-Ring Face Seal x Male Pipe End Style, Steel
HCI Preferred Supplier FSO24042424 Straight Hydraulic Adapter, 2-12 x 1-1/2 in Nominal, Male O-Ring Face Seal x Male Pipe End Style, Steel
Southwire® Titan2® 55107202 Type LTM-EF Liquid Tight Flexible Metal Conduit, 2 in Trade, 2.02 to 2.045 in ID x 2.34 to 2.375 in OD, 50 ft L, Aluminum/Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
Anvil® 0318907961 FIG 383 Hex Head Pipe Bushing, 2-1/2 x 2 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150/300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
