Southwire® Titan2® 55107202 Type LTM-EF Liquid Tight Flexible Metal Conduit, 2 in Trade, 2.02 to 2.045 in ID x 2.34 to 2.375 in OD, 50 ft L, Aluminum/Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
-
BrandSouthwire®
-
UPC032886043109
-
Manufacturer Part Number55107202
-
CountryUSA
-
Temperature Rating14 to 140 deg F
-
FinishGalvanized
-
MaterialAluminum/Steel
-
Trade Size2 in
-
ColorGray
-
TypeType LTM-EF
-
Inside Diameter2.02 to 2.045 in
-
Bend Radius12 in
-
Outside Diameter2.34 to 2.375 in
-
Length50 ft
- Delivers wiring protection where listed products are not required
- For exposed or concealed installations requiring movement crossover connections or tight bends
- Requires standard liquid-tight fittings
- Delivers wiring protection where listed products are not required
- Seals out abrasives, alcohol, coolants, corrosive fumes and gases, dirt, grease, mineral acids, non-concentrated fixed alkalines, petroleum oils, salt air spray, water and weather
- For exposed or concealed installations requiring movement, crossover connections, or tight bends
- Oil resistant, sunlight resistant
- Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel
- A flame retardant, flexible PVC jacket is extruded over the metal core
- The gray jacket resists oils, mild acids and exposure to sunlight
-
Alternative Part Number8872452
-
UNSPSC39131706
-
IDEA Index ID8872452
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|NEC Article 350|PROP65: This product contains material that,the State of California has determined|may cause reproductive harm. www.p65warnings.ca.gov/product
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Southwire® Titan2® 55107202 Type LTM-EF Liquid Tight Flexible Metal Conduit, 2 in Trade, 2.02 to 2.045 in ID x 2.34 to 2.375 in OD, 50 ft L, Aluminum/Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
Appleton® UNILETS® EYSF50 Dust-Ignitionproof Explosionproof Raintight Conduit Sealing Fitting, 1/2 in, For Use With IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated
These Appleton® sealing fittings minimize the passage of gases and vapors and prevent the passage of flames from one portion of a conduit system to another. They prevent pressure piling within conduit system and contain any explosion that occurs. The EYS series is used for sealing vertical conduit, and provides a large opening for damming and filling.
Coilhose® 152-P100 Coilflow Manual Industrial Type 15 Manual Industrial Hose Coupler, 1/4 in Nominal, Quick Disconnect Coupler x FNPT, 300 psi Pressure, Brass, Domestic
Coilhose® 152-P100 Coilflow Manual Industrial Type 15 Manual Industrial Hose Coupler, 1/4 in Nominal, Quick Disconnect Coupler x FNPT, 300 psi Pressure, Brass, Domestic
Southwire® Titan2® 55094003 Type LTM-EF Liquid Tight Flexible Metal Conduit, 3/4 in Trade, 0.82 to 0.84 in ID x 1.03 to 1.05 in OD, 100 ft L, Aluminum/Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
SCREW CONVEYOR ADAPTER-BRW107SCAP >
The Square D™ by Schneider Electric brand heavy duty safety switch is designed to be tough, reliable and provide exceptional performance in the most gruelling conditions from commercial and institutional to industrial and manufacturing facilities. F Series safety switches provide significantly higher levels of mechanical endurance than NEMA KS-1 or UL98 standards require. The design life of a F Series switch is a minimum of three times the NEMA requirement. An abundance of copper is used in the heaviest current carrying power paths of all Square D™ by Schneider Electric heavy duty safety switches. The more copper for current carrying paths, the lower the temperature rise. Managing temperatures inside the switch is the key to providing greater service life. All heavy duty safety switches feature a quick-make, quick-break operating mechanism, a dual cover interlock and a color coded indicator handle.
