Conduit Connectors
AppletonĀ® ETPā¢ 4050S 4000S Non-Insulated Straight Set Screw Connector, 1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 4075S 4000S Non-Insulated Straight Set Screw Connector, 3/4 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 4125S 4000S Non-Insulated Straight Set Screw Connector, 1-1/4 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 4150S 4000S Non-Insulated Straight Set Screw Connector, 1-1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® ETPā¢ 7250S 7000S Non-Insulated Throat Straight Compression Connector, 2-1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
AppletonĀ® offer ETPā¢ 7000S Series steel EMT compression connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 7000S Series have a male NPS threaded hub and are available with or without an insulated throat.
AppletonĀ® NEERā¢ AC95 Non-Insulated Conduit Connector With Locknut, 1/2 in Trade, For Use With Armored/FMC/Metal Clad Cable, Die Cast Zinc, Natural/Zinc Plated
AppletonĀ® offer NEERā¢ zinc cable and conduit connectors for terminating flexible metal conduit in a dry location box or enclosure, or joining lengths of flexible metal conduit. Type SC straight squeeze connectors, Type AC 90 deg two screw clamp connectors and Type DC-5500 duplex, single screw, clamp connectors are used to make a termination of flexible metal conduit. Type FC set screw connectors are used to terminate 1/2 in regular wall steel or aluminum flexible conduit. Type GC screw-in connectors are for use with flexible metal conduit. Type GX screw-in connectors are used to join lengths of flexible metal conduit.
RACOĀ® 2646 Non-Insulated Set Screw Conduit Connector, 4 in Trade, 4-5/32 in Cable Openings, For Use With EMT Conduit, Die Cast Zinc
RACOĀ® 2646 Non-Insulated Set Screw Conduit Connector, 4 in Trade, 4-5/32 in Cable Openings, For Use With EMT Conduit, Die Cast Zinc
Steel CityĀ® TC912-SC-1 Compression Conduit Connector, 3/4 in Trade, For Use With EMT Conduit, Die Cast Zinc
Steel CityĀ® TC912-SC-1 Compression Conduit Connector, 3/4 in Trade, For Use With EMT Conduit, Die Cast Zinc
Steel CityĀ® TO221-1 Offset Set Screw Cable Connector, 1/2 in Trade, For Use With EMT Conduit, Die Cast Zinc
Steel CityĀ® TO221-1 Offset Set Screw Cable Connector, 1/2 in Trade, For Use With EMT Conduit, Die Cast Zinc
Recently Viewed
ProtoĀ® J1312PGD Ball Pein Hammer, 12-1/16 in OAL, 12 oz Forged Steel Head, Fiberglass Handle
Transport chain is considered the chain of choice for load binding applications. It is also well suited for tie-downs, towing and logging operations. Engineered for maximum strength, this domestic transport chain is made from heat treated carbon strength steel. Heat treatment is associated with increased steel strength which improves product performance. Its strength to weight ratio exceeds that of proof coil and high-test. This chain meets department of transportation regulations and is permanently stamped with its working load limit every ten links. Order unit is foot. Not for overhead lifting.
70-WATT SODIUM LUCALOXBULBS-BULLU70 >
1/2-TON L-90 30' CHAIN HOIST-JET101307 >
AppletonĀ® ETPā¢ 2594 Handy Box Cover, 4 in L x 2-1/8 in W, Toggle Switch Cover, Steel
AppletonĀ® ETPā¢ 2594 Handy Box Cover, 4 in L x 2-1/8 in W, Toggle Switch Cover, Steel
LittelfuseĀ® POWR-GARDĀ® LKN040 Fuse Link, 250 VAC, 40 A, For Use With RLN Series Class H Single Element Renewable/Time Delay Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
