Browning 3/4"-ID TORQUE LIMITERS BRW T-35-L X 3/4
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
-
BrandBrowning®
-
UPC662289231614
-
Manufacturer Part Number1296375
-
CountryUSA
-
Maximum Speed1000 rpm
-
Torque Rating1800 in-lb (1 Spring)/3000 in-lb (2 Spring)
-
TypeAutomatic
-
Minimum Sprocket Teeth26 (NO. 40 Chain), 26 (NO. 41 Chain), 21 (NO. 50 Chain)
-
Outside Diameter3-1/2 in
-
Bore Diameter3/4 in
-
Bore TypeStraight
-
Overall Length2-1/4 in
- High accuracy
- Low cost
- Compact and reversible
- Non-asbestos pads
- Model T35L
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Browning torque limiters slip under excessive load but automatically carry the desired load after the excess has been removed
- Browning offers a complete set of replacement shear pins
- Shear pins are available in a wide range of minimum shear strength
- Browning torque limiters are friction type devices that reset to any position
-
Alternative Part NumberT35LX3/4
-
UNSPSC41114510
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
STAINLESS STEEL BELT LACING-COV15S18 >
Krylon® K01401777 Metallic Spray, 16 oz Container, Bright Silver, 25 sq-ft Coverage, 15 min Curing
FYH® SAA206 20FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SAA206 20FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
IDEAL FOR USE IN SECURITY SYSTEMS, COMMUNICATIONS, INTERCOM OR PA SYSTEMS, AND SOUND OR AUDIO APPLICATIONS. PVC INSULATION,
L-JWH549150 >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
