Shear Pins
Martin Accu-Torch® SPP-29 Scratched Shear Pin, For Use With Bolt-On Shear Pin Sprocket, Steel
Shear pin sprockets provide simple, dependable protection against expensive machinery damage caused by overloads or jamming. Torque is transmitted by a single pin, necked to shear when the safe load is exceeded. When an overload occurs the pin shears, disconnecting the drive immediately. Shear pins can be necked to customer specific torque ratings.
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
Recently Viewed
16-MM X 110-MM SOCKET HEAD CAPSCREW-MET91216110 >
20PC 3/8"-DR INCH/METRIC TOO - ALL66635G >
Milwaukee® 48-03-3545 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 1 to 1-1/2 in Thinwall Core Bit, 8 in OAL
8 in. SDS Plus adapter for 1 in. to 1-1/2 in. thin wall core bits. Includes shank only.
Starrett® 666-2 Straight Leave Thickness Gage With Dispenser Case, 25 ft L x 1/2 in W x 0.002 in THK, Tempered Steel
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
15-TON 2"-STROKE HYDRAULIC RAM - ENERC152>
3-3/4" OVERALL LENGTH EXTENSION SPRINGS: MAXIMUM LOAD 8.02" LBS.-AJAGE48 >
