Browning® 3750627 Taper Lock Bushing, 2-1/2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning® 3750627 Taper Lock Bushing, 2-1/2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
-
BrandBrowning®
-
UPC662289618026
-
Manufacturer Part Number3750627
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating24000 in-lb
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Barrel Diameter4-1/4 in
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter4 in
-
Bore Diameter2-1/2 in
-
Overall Length3 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
- Mounts flush in products - No protruding flanges to interfere with the drive
-
Alternative Part Number3030X 2 1/2
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Browning® 3750627 Taper Lock Bushing, 2-1/2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning® 3750627 Taper Lock Bushing, 2-1/2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning® 3749116 Taper Lock Bushing, 1-1/16 in Dia Bore, 2-1/4 in Dia Barrel, 1-1/2 in OAL, Steel
Browning® 3749116 Taper Lock Bushing, 1-1/16 in Dia Bore, 2-1/4 in Dia Barrel, 1-1/2 in OAL, Steel
ASP-502-S Industry Standard Clamping Collar, 2-Piece Construction, 1/2 in ID x 1-1/8 in OD x 13/32 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Dodge® 023692 407 Type E-Xtra Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 13-1/4 to 13-3/4 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 16.63 in OAL 9.28 in OAH
Dodge® 023692 407 Type E-Xtra Pillow Block Roller Bearing Unit, 4-7/16 in Dia Bore, 13-1/4 to 13-3/4 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 16.63 in OAL x 9.28 in OAH
Browning® 1296359 Automatic Torque Limiter, 7/8 in Straight Bore, 2-1/2 in OD, 800 in-lb (1 Spring)/1100 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
Browning® 3748498 Taper Lock Bushing, 11/16 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3748498 Taper Lock Bushing, 11/16 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
