Browning® 1080050 Split Taper Bushing, 2 in Dia Bore, 4.418 in Small End/4.625 in Large End Dia Barrel, 6-3/8 in Dia Flange, 4-3/8 in OAL, Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289171248
-
Manufacturer Part Number1080050
-
CountryUSA
-
MaterialSteel
-
Flange Diameter6-3/8 in
-
Flange Thickness3/4 in
-
Screw Size1/2 x 2-1/4 in
-
Number of Bolt Holes3
-
Barrel Diameter4.418 in Small End/4.625 in Large End
-
Keyway Size1/2 x 1/4 in
-
Bolt Circle Diameter5-3/8 in
-
Bore Diameter2 in
-
Overall Length4-3/8 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- 3/4 in/ft taper on barrel, self locking taper provides the highest degree of mechanical locking product to product
- Keyed to both shaft and hub, external key provides positive drive with no torque on the cap screws
- Highest torque carrying capacity in the Browning® bushing product line
- Double split barrel assures true concentricity grips the shaft with positive clamp fit
- Cast iron
-
Alternative Part NumberS1 2
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1080050 Split Taper Bushing, 2 in Dia Bore, 4.418 in Small End/4.625 in Large End Dia Barrel, 6-3/8 in Dia Flange, 4-3/8 in OAL, Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
48" MAHOGANY LEVELS-M-D26203>
Porter-Cable® 44858 Flush Bevel Combination Router Bit, 7/16 in Dia Cutting, 1-3/4 in OAL, 1/4 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable® 44858 Flush Bevel Combination Router Bit, 7/16 in Dia Cutting, 1-3/4 in OAL, 1/4 in D Cutting, 1/4 in Dia Shank, Carbide
Apex® 440-TX-45X Insert Bit, T45 Torx® Point, 1-1/4 in OAL
Proto® J9214M Nut Driver, 14 mm, Round/Solid Shank, Blue Fluted Handle, ASME B107.110-2012, Polished Chrome
Proto® J9214M Nut Driver, 14 mm, Solid Round Shank, Blue Fluted Handle, ASME B107.110-2012, Polished Chrome
DRILLCO 21PS116C 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
