McGill 3"-ID NEEDLE ROLLER BEARINGS MCG MR-48
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
-
BrandMcGill®
-
UPC726166067984
-
Manufacturer Part Number5454800000
-
CountryUSA
-
Load Capacity30300 lb Dynamic/63400 lb Static
-
Cage MaterialSteel
-
Temperature Rating-20 to 250 deg F
-
Maximum Speed4000 rpm
-
Closure TypeUnsealed
-
TypeHeavy Duty Standard
-
Width1-3/4 in
-
SeriesMR Series
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter3-3/4 in
-
Bore Diameter3 in
- Machined outer race
- Needle roller with end relief
- Annular lubrication groove and holes
- Factory grease f
-
Alternative Part NumberMR 48
-
UNSPSC31171542
-
Package DescriptionEACH
-
Specification Sheet
-
Catalog
Recently Viewed
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Charlotte CTS 02100I 0600 Transition Coupling, 3/4 in Nominal, CTS x Socket End Style, CPVC, Domestic
FlowGuard Gold CPVC CTS is for hot and cold water distribution. It is for pressure systems where temperatures will not exceed 180 deg F. It can withstand high pressure for long periods, does not rust or corrode,
O-Z/Gedney LB50A Type LB Conduit Outlet Body, 1/2 in Hub, 4.3 cu-in Capacity, Die Cast Copper Free Aluminum, Aluminum Enamel/Epoxy Powder Coated
O-Z/Gedney Aluminum Conduit Bodies, Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.
3/8" OR #6 FLAT FACE O-RING OFS CAPS-DAYFS304C6 >
TUNGSTEN CARBIDE BURR, 1/4" OVAL SHAPED (SE-51) WITH 1/8" SHANK. MAXRPM: 90,000. SHANK MOUNTED TUNGSTEN CARBIDE BURRS ARE DOUBLE CUT FOR FINE WORK
IKO LBB4 Inch Series Standard Linear Bushing, 1/4 in Dia Shaft, 1/2 in OD, 3/4 in L
IKO LBB4 Inch Series Standard Linear Bushing, 1/4 in Dia Shaft, 1/2 in OD, 3/4 in L
