Browning® 3207982 QD Bushing, 28 mm Dia Bore, 1-7/8 in Dia Barrel, 68.2625 mm Dia Flange, 30.48 mm OAL, Ductile Iron
Browning® 3207982 QD Bushing, 28 mm Dia Bore, 1-7/8 in Dia Barrel, 68.2625 mm Dia Flange, 30.48 mm OAL, Ductile Iron
-
BrandBrowning®
-
UPC662289616305
-
Manufacturer Part Number3207982
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter68.2625 mm
-
Flange Thickness7/16 in
-
Torque Rating3500 in-lb
-
Screw Size1/4-20 x 1-3/8 in
-
Number of Bolt Holes3
-
Barrel Diameter1-7/8 in
-
Keyway Size8 x 3.5 mm
-
Bolt Circle Diameter2-1/4 in
-
Bore Diameter28 mm
-
Overall Length30.48 mm
-
Suitable For Use WithBrowning® Sheaves, Sprockets and Pulleys
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
- Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
-
Alternative Part NumberSH 28 MM
-
UNSPSC31171516
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® 3207982 QD Bushing, 28 mm Dia Bore, 1-7/8 in Dia Barrel, 68.2625 mm Dia Flange, 30.48 mm OAL, Ductile Iron
Browning® 3207982 QD Bushing, 28 mm Dia Bore, 1-7/8 in Dia Barrel, 68.2625 mm Dia Flange, 30.48 mm OAL, Ductile Iron
Husky CF0620C Water-Resistant Sheeting, 100 ft L x 20 ft W x 6 mil THK, Polyethylene
OAK MOLDING CARPET BAR 72"-M-D85365>
WIDE SINGLE ROW BALL BEARING-GULS35072RS >
The M12™ HAMMERVAC™ Universal Dust Extractor is a universal solution for eliminating dust when drilling with any SDS Plus rotary hammer. It is the industry's only onboard universal dust extractor. The universal side handle allows for operation with any SDS Plus hammer in the industry: corded, cordless, Milwaukee Brand or other. The AUTOPULSE™ filter cleaning mechanism will clean the filter automatically after use, allowing for OSHA Table One Compliance. This extractor allows users to drill up to 8" in depth and up to 1-1/4" in diameter with two accessory nozzles designed for small and large diameters. The adjustable depth stop allows for quickly and accurately setting the desired hole depth. The dust box can be emptied with no exposure by hooking it up to a large dust extractor to vacuum out the dust. The tool also features an Auto On/Off Mode that saves time and battery life. The M12™ HAMMERVAC™ runs off of any Milwaukee M12™ REDLITHIUM™ Battery to be a fully self-powered unit.
WIDE SINGLE ROW BALL BEARING-GULS35042RS >
