Browning® 1078096 QD Bushing, 2-5/8 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandBrowning®
-
UPC662289355976
-
Manufacturer Part Number1078096
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter3-7/8 in
-
Flange Thickness9/16 in
-
Torque Rating7000 in-lb
-
TypeStandard
-
Screw Size5/16-18 x 2 in
-
Number of Bolt Holes3
-
Barrel Diameter2-13/16 in
-
Bolt Circle Diameter3-5/16 in
-
Bore Diameter2-5/8 in
-
Overall Length1-3/4 in
-
Keyway Size5/8 x 5/16 in
-
Suitable For Use WithBrowning® Sheaves, Sprockets and Pulleys
- Reverse mounting ability bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
- Self locking taper provides the highest degree of mechanical locking product to product
- Conventional mounting
- 3/4 in/ft Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
- Without keyway
-
UNSPSC31171516
-
Alternative Part NumberSK 2 5/8
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Instruction/Installation Manual
Recently Viewed
Browning® 1078096 QD Bushing, 2-5/8 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
JASON 345L150 POSITIVE DRIVE TIMING BELT, L SERIES 3/8" PITCH, 92 TEETH 34.50" PITCH LENGTH 1-1/2" WIDE
STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS345L150 >
The Universal 120-277V Breaker Lockouts are hinged with locking post design. Breaker lockout locks lever in off position to isolate and to prevent the use of breaker. It features a universal model that has unique screw clamp to lockout all Single-Pole Breakers. The Universal 120-277V Breaker Lockouts use thumbscrew to clamp lockout securely on to switch tongue, then pull cover over thumbscrew and lock in place to prevent clamp from being loosened. The new blade design also provides a tighter grip with less torque on thumbscrew. Breaker lockout meets RoHS standards.
Performance is exceptional, and the broad selection includes interior/exterior acrylic lacquers, primers, and specialty paints. Acryli-Quik aerosols provide all of the superior characteristics that customers have come to expect from our brand. We offer high solids, fast-drying times and an excellent appearance. No Runs, No Drips, No Errors!®
GP® 1020R Standard Length Socket, 3/8 in Drive, 5/8 in Socket, 6 Points
10-TOOTH #41-1 CHAIN SPROCKETS IDC 41-B-10-F-5/8
10 TOOTH SPROCKETS FOR #41 CHAIN
