Dodge® 117096 Stock Bore Taper Lock Bushing, 2-1/8 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475508860
-
Manufacturer Part Number117096
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating11600 in-lb
-
TypeStock Bore
-
Screw Size1/2 x 1 in
-
Number of Bolt Holes2
-
Hub Diameter4.38 in
-
Barrel Diameter3.38 in
-
Keyway Size1/2 x 1/4 in
-
Bolt Circle Diameter3-1/4 in
-
Bore Diameter2-1/8 in
-
Overall Length1-3/4 in
- Size 2517 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number2517 X 2-1/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Dodge® 117096 Stock Bore Taper Lock Bushing, 2-1/8 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
White 10 Ft. long canvas covered, wire reinforced, rubber lined 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
3" GREEN COARSE 50-GRIT ROLOC BRISTLE DISC - MMM07526>
MORSE® 58854 5957 Ball Nose Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL, Bright
1-GAL 25% HIGH GLOSS FLOOR FINISH-ML-FC12251GAL >
Dodge® 119058 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 2-1/4 in Dia Barrel, 1-1/2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
