Keyless Bushings
Fenner Drives® Trantorque® 6202380 GT Series Collar Nut Keyless Bushing, 1-7/16 in Dia Bore, 2-3/8 in OD, 2-3/4 in OAL, Steel
From gears to cams, timing belt sprockets to conveyor rolls, climate control fan hubs to grinding wheels, the extensive range of Trantorque® keyless bushings - all with a single locking nut - offers easy to use options for mounting and adjusting position sensitive, zero backlash drive components and accessories.
Fenner Drives® Trantorque® 6202803UP GT Series Keyless Bushing, 16 mm Dia Bore, 38 mm OD, 38.1 mm OAL, Steel
The Trantorque® GT series 16 mm keyless bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 16 mm in diameter by means of a mechanical interference fit and transmits up to a maximum 209 N-m of torque.
Fenner Drives® Trantorque® TTQM1223 Mini Single Taper Keyless Bushing, 12 mm Dia Bore, 23 mm OD, 26 mm OAL, Steel
The Trantorque® mini series 12 mm keyless bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 12 mm in Dia by means of a mounted mechanical interference fit and transmits up to 81 N-m of torque. Trantorque® mini series 12 mm keyless bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending and/or radial loads. This product has exceptional concentricity and the ability to accommodate bending loads. The Trantorque® mini series has limited axial movement during installation. All Trantorque® units use a single hex nut for speed and simplicity of installation.
Recently Viewed
48 SHOULDERED BENT SHOVEL HANDLE
FAST CHARGER HOLDERS-STM75103 >
WATTS® 0063010 009 Inline Reduced Pressure Zone Assembly, 2 in Nominal, NPT End Style, Quarter-Turn Ball Valve, Bronze Body, Reduced Pressure Zone, 7.5 fps Flow Rate
Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to back siphon age and or backpressure. It consists of bronze body construction (1/4 to 2 in, 8 to 50 mm) or FDA approved epoxy coated cast iron (2-1/2 to 3 in, 65 to 80 mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements.
GRIDFLEX VERTICAL COUPLING COVER-BRW1080CKV >
SIZE " 20" JOINING BISCUITS (EACH)-POR5553 >
40 In. Ditch Bank Blade Handle for 3-Hole Blades. Better-Quality American Hickory, clear lacquer, fire finish, Contractor Grade.
