Gates® Power Transmission Poly Chain® GT®2 8MX-40S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.947 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/4 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053270990
-
Manufacturer Part Number8MX-40S-21
-
CountryUSA|Canada
-
Face Width1-1/4 in
-
Bushing Type2012
-
Pitch8 mm
-
Pitch Diameter4.01 in
-
MaterialDuctile Iron
-
Flange Diameter4.41 in
-
Series7718
-
Number of Grooves40
-
Outside Diameter3.947 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With21 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77182040
-
UNSPSC31171900
-
Package DescriptionEACH
-
Full Engineering Drawing
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-40S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.947 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/4 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
BBI 486112 Lag Screw, 1/4 in, 1-1/4 in OAL, Low Carbon Steel, Zinc Blue
13-HP KOHLER GROMMETS-CAC07392 >
1" BLACK 90-DEGREE STREET ELBOW-JPW1BSTE >
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
The United Abrasives/SAIT Type 27 Saitech Ultimate Performance™ wheels are made to go on an angle grinder. High performance, ceramic aluminum oxide grain, is designed to outlast standard aluminum oxide wheels. Hard bond for long life grinding with fast stock removal. Very uniform, high density grain structure for long life and cooler cut. United Abrasives/SAIT wheels are reinforced with the highest quality fiberglass for maximum safety and performance. Proudly manufactured in the USA.
