Gates® Power Transmission Poly Chain® GT®2 8MX-53S-62 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5-1/4 in OD, 53 Grooves, 5.314 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC72053460698
-
Manufacturer Part Number8MX-53S-62
-
CountryUSA|Canada
-
Face Width2.91 in
-
Bushing Type2517
-
Pitch8 mm
-
Pitch Diameter5.314 in
-
MaterialCast Iron
-
Flange Diameter5-1/2 in
-
Series7718
-
Hub Diameter4.76 in
-
Number of Grooves53
-
Outside Diameter5-1/4 in
-
Bore Diameter1/2 to 2-11/16 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With62 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77186053
-
UNSPSC31171900
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Full Engineering Drawing
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-53S-62 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5-1/4 in OD, 53 Grooves, 5.314 in Dia Pitch, 2.91 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Browning® 1060417 Type 13 Solid Multiple Sheave, 1/2 to 1-3/4 in Split Taper Bore, 5.6 in OD, 4 Grooves, 5.55 in Dia Pitch, 1-29/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
RUS-KIL SAFETY YELLOW SPRAY PAINT-BLP1056S >
Generally used where low shaft-to-center dimension exist
features
Powder coated epoxy cast iron housing with extended inner ring bearings
Zone hardened inner ring with 120° spacing setscrew locking with diamond faceted setscrews
Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
Sealmaster® exclusive lock pin & dimple for direct lubrication and anti-rotation
United Abrasives-SAIT 1AX Blue Line™ 57110 Semi-Friable Coated Abrasive Belt, 3 in W x 18 in L, 220 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
ECONOMY FLAT BLACK SPRAY PAINT-KRYB43 >
