Dodge® 131842 209 Normal Duty Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5.5 to 6.19 in L Bolt Center-to-Center, 2.06 in Base to Bore Centerline, 7.44 in OAL x 4.21 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
-
BrandDodge®
-
UPC782475119516
-
Manufacturer Part Number131842
-
CountryUSA
-
Load Capacity7891 lb Dynamic/4906 lb Static
-
Locking DeviceEccentric Collar
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed5000 rpm
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series209
-
Base Width2 in
-
Base to Bore Centerline2.06 in
-
Bolt Center-to-Center Length5.5 to 6.19 in
-
Bore Diameter1-5/8 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4.21 in
-
Overall Length7.44 in
-
Overall Width2.13 in
- Precision-hardened inner ring
- Normal duty wide inner ring
- Dodge® dual guard land-riding, positive contact seal
- Stronger and flexible ball cage
- Simplified anti-rotation device
- Low backing height pillow block
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 101893937 |
| Motion Industries | 00558318 |
-
Alternative Part NumberP2B-SXRB-110
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Owners/User Manual
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Dodge® 131842 209 Normal Duty Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5.5 to 6.19 in L Bolt Center-to-Center, 2.06 in Base to Bore Centerline, 7.44 in OAL x 4.21 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
DeWALT® 07589-PWR Bantam Plug™ Light Duty Bantam Plug Wall Anchor, #14 to #16 Dia, 5/16 in Drill, #14 to #16 Screw, 1-1/2 in OAL, Engineered Plastic
The bantam plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, other wall anchors may be considered depending on the application. The bantam plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. These fasteners are not recommended for use overhead or applications where holding values are critical.
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
3/4" X 30-YARDS GREEN FINGER TAPE-MOD110075 >
Sealmaster® 700327 Non-Expansion Standard Duty Ball Bearing Cartridge With Seal Flinger, 1-7/16 in Dia Bore, 3-7/8 in OD, 1-11/16 in W, 5782 lb Dynamic/3493 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Dodge® 123839 214 Normal Duty Pillow Block Ball Bearing Unit, 2-11/16 in Dia Bore, 7-1/2 to 8-1/2 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 10-3/4 in OAL x 6.09 in OAH
Dodge® 123839 214 Normal Duty Pillow Block Ball Bearing Unit, 2-11/16 in Dia Bore, 7-1/2 to 8-1/2 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 10-3/4 in OAL x 6.09 in OAH
