Gates® Power Transmission Poly Chain® GT®2 PB8MX-28S-36 Synchronous Sprocket, 1/2 to 1-3/4 in, 2.744 in OD, 28 Grooves, 2.807 in Dia Pitch, 1.86 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
-
BrandGates® Power Transmission
-
UPC072053270099
-
Manufacturer Part NumberPB8MX-28S-36
-
CountryUSA
-
Face Width1.86 in
-
Bushing TypeMPB
-
Pitch8 mm
-
Pitch Diameter2.807 in
-
MaterialSteel
-
Flange Diameter3.21 in
-
Series7715
-
Hub Diameter2.34 in
-
Number of Grooves28
-
Outside Diameter2.744 in
-
Bore Diameter1/2 to 1-3/4 in
-
Overall Length2.44 in
-
Suitable For Use With36 mm W Poly Chain® Belt
- Full split in bushing allows easy installation and removal
- Poly Chain® GT®2 sprockets keep overhung load below manufacturers recommendation
- Precise sprocket design produces positive, press fit to shaft
- Sprockets are precision manufactured and static balanced
- Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer
-
Alternative Part Number77153028
-
UNSPSC31171900
-
Package DescriptionEACH
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 PB8MX-28S-36 Synchronous Sprocket, 1/2 to 1-3/4 in, 2.744 in OD, 28 Grooves, 2.807 in Dia Pitch, 1.86 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission PowerGrip® GT®2 P38-14MGT-55 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 6.559 in OD, 38 Grooves, 6.669 in Dia Pitch, 2.84 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission Poly Chain® GT®2 8MX-40S-21 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.947 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/4 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission Poly Chain® GT®2 8MX-30S-21 Synchronous Sprocket, 1/2 to 1-1/8 in Taper-Lock® Bore, 2.945 in OD, 30 Grooves, 3.008 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission PowerGrip® GT®2 P80-8MGT-30 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.966 in OD, 80 Grooves, 8.02 in Dia Pitch, 1.49 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
MCR Safety PA112AF Plasma® Lightweight Safety Glasses, Duramass® Anti-Fog, Gray Lens, Wrap Around Frame, Black, Polycarbonate Frame, ANSI Z87+
MCR Safety PA112AF Plasma® Lightweight Safety Glasses, Duramass® Anti-Fog, Gray Lens, Wrap Around Frame, Black, Polycarbonate Frame, ANSI Z87+
