P40-8M-30-2012 Dodge® 112876 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.956 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/2 in W Face
P40-8M-30-2012 Dodge® 112876 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.956 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/2 in W Face
-
BrandDodge®
-
UPC782475675647
-
Manufacturer Part Number112876
-
CountryUSA
-
Face Width1-1/2 in
-
Bushing Type2012
-
Pitch8 mm
-
Pitch Diameter4.01 in
-
Flange Diameter4.331 in
-
TypeType A1F
-
SeriesHT250
-
Number of Grooves40
-
Outside Diameter3.956 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
- Positive and non-slip drive
- No lubrication required
- Non-stretch
- Corrosion resistant
- Abrasion resistant
- Virtually no backlash
- Long life
- Low maintenance
-
Alternative Part NumberP40-8M-30-2012
-
UNSPSC26111807
-
Package DescriptionEACH
-
Specification Sheet
-
Line Drawing
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
P40-8M-30-2012 Dodge® 112876 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.956 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/2 in W Face
Morse® Raider® Plus XJ0237 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Double Solid Shaft Output, 1 hp, 30:1 Gear Ratio, 58.3 rpm Maximum Output, 138.66 in-lb Input/58.3 in-lb Output Torque Rating
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style (U style, shaft input) with an output shaft and the C-face style (Q style, input quill) with an output shaft. Both the U and Q styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
Morse® Raider® Plus XI1173 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Double Solid Shaft Output, 1 hp, 10:1 Gear Ratio, 175 rpm Maximum Output, 291.43 in-lb Input/175 in-lb Output Torque Rating
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style (U style, shaft input) with an output shaft and the C-face style (Q style, input quill) with an output shaft. Both the U and Q styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
United Abrasives-SAIT 57016 Close Coated General Purpose Abrasive Disc, 7 in Dia, 7/8 in Center Hole, 16 Grit, 2A Aluminum Oxide Abrasive
United Abrasives-SAIT 57016 Close Coated General Purpose Abrasive Disc, 7 in Dia, 7/8 in Center Hole, 16 Grit, 2A Aluminum Oxide Abrasive
2" X 4-1/2" BLACK NIPPLE-JPW2X41/2BN >
Morse® Raider® Plus XI1148 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Double Solid Shaft Output, 1 hp, 40:1 Gear Ratio, 43.7 rpm Maximum Output, 105.38 in-lb Input/43.7 in-lb Output Torque Rating
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style (U style, shaft input) with an output shaft and the C-face style (Q style, input quill) with an output shaft. Both the U and Q styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
