HTD Pulleys
P72-8M-30-2517 Dodge® 112881 HT250 Type B1F High Torque Belt Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.164 in OD, 72 Grooves, 7.218 in Dia Pitch, 1-1/2 in W Face
P72-8M-30-2517 Dodge® 112881 HT250 Type B1F High Torque Belt Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.164 in OD, 72 Grooves, 7.218 in Dia Pitch, 1-1/2 in W Face
P40-8M-30-2012 Dodge® 112876 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.956 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/2 in W Face
P30-8M-30-1210 Dodge® 112871 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 2.954 in OD, 30 Grooves, 3.008 in Dia Pitch, 1-1/2 in W Face
P30-8M-30-1210 Dodge® 112871 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 2.954 in OD, 30 Grooves, 3.008 in Dia Pitch, 1-1/2 in W Face
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
14MX-67S-68-3525 Dodge® 482117 HT500 Type A2F High Torque Belt Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 11.645 in OD, 67 Grooves, 11.755 in Dia Pitch, 3.33 in W Face
The Dodge® high torque HT500 synchronous drive product line utilizes a modified curvilinear tooth profile to delivers high torque, low maintenance and high energy efficiency with less overhung load than V-belt drives. The HT500 product family features a complete offering of synchronous sprockets with shaft attachment options including taper-lock and QD bushings (fin fan), as well as minimum plain bore sprockets (MPB) and idler sprockets available from stock.
Recently Viewed
Clipped head smear shank coated nails tet jobs done quickly and easily with this 2 in clipped head smear shank coated nails. You can get years of use with only minimal wear and tear.
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
5/16" X 1-1/2" Hex Head Zinc Lag Screws
5/16" X 3-3/4" USS GR-8 Hex Head Capscrew
Southwire® 28827455 Type NM-B Non-Metallic Sheathed Cable, Coil Packaging, 600 V AC, (2) 14 AWG Solid Copper Conductor, 250 ft L, White
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
5-VX-850/08 PIX BELTS
8-GRV BANDED 5-VX-850 V-BELTS-PIX5VX850/08>
