Gates® Power Transmission Super HC® PowerBand® 8/5V800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 80 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053400854
-
Manufacturer Part Number8/5V800
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9386
-
Number of Ribs8
-
Outside Length80 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93868080
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 8/5V800 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 80 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Morse® XB9003 Vertical Low Base Kit, For Use With Raider® Plus Styles UVH, QVH, CVH, UHVH, QHVH, CHVH, Size 1.33 in Center Distance Worm Gear Reducer, Cast Iron
Coilhose® 600-SB Blow Gun, Safety Tip, 150 psi Working, 1/4 in FNPT Inlet x 1/8 in FNPT Outlet Thread, Die Cast Zinc, Import
The 600 series blow guns are a thumb lever style blow gun with an ergonomic shape and accept all Coilhose® 1/8 in tips. User comfort was designed into the 600 series with the elimination of the valve where the user's fingers are placed. Models that are designated as "safety" conform to OSHA standards for noise levels (1910.95) and 30 psi dead end pressure (1910.242B).
30" PLASTIC CONVEXTRAFFIC MIRROR-LLBP300 >
3/4" X 4-1/2" BLACK NIPPLE-JPW3/4X41/2BN >
1-7/16"-ID 2-BOLT PILLOW BLOCKS-JNEJA2107>
