Gates® Power Transmission Super HC® 5V1900 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 190 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053290868
-
Manufacturer Part Number5V1900
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9334
-
Number of Ribs1
-
Outside Length190 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number93341900
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Super HC® 5V1900 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 190 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Moldex® 8002 8000 Probed Reusable Half Mask Respirator, M, Yolk/Cradle Suspension
HCI Preferred Supplier 250362 Hydraulic Elbow, 9/16-18 x 1/8 in Nominal, 37 deg SAE Male JIC Flare, Steel
HCI Preferred Supplier 250362 Hydraulic Elbow, 9/16-18 x 1/8 in Nominal, 37 deg SAE Male JIC Flare, Steel
Gates® Power Transmission PowerGrip® 420H150 Heavy Timing Belt, 1-1/2 in W, 42 in OAL, 1/2 in Pitch, 84 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Gates® Power Transmission PowerGrip® 240H150 Heavy Timing Belt, 1-1/2 in W, 24 in OAL, 1/2 in Pitch, 48 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
HCI Preferred Supplier 28589 Universal Automatic Coupler, 3/8 in Nominal, Male NPTF, Brass Body/NBR Seal/Stainless Steel Spring/Steel Locking Ball
HCI Preferred Supplier 28589 Universal Automatic Coupler, 3/8 in Nominal, Male NPTF, Brass Body/NBR Seal/Stainless Steel Spring/Steel Locking Ball
