Gates® Power Transmission Super HC® PowerBand® 3/3V670 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 67 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053261455
-
Manufacturer Part Number3/3V670
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Non-Notched Raw Edge
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9385
-
Number of Ribs3
-
Outside Length67 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93853067
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® PowerBand® 3/3V670 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 67 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Coilhose® PE064-100N Standard Pneumatic Tubing, 1/4 in ID x 3/8 in OD x 100 ft L, 0.62 in THK Wall, Polyethylene, Domestic
Coilhose® PE064-100N Standard Pneumatic Tubing, 1/4 in ID x 3/8 in OD x 100 ft L, 0.62 in THK Wall, Polyethylene, Domestic
Gates® Power Transmission PowerGrip® 450L075 Light Timing Belt, 3/4 in W, 45 in OAL, 3/8 in Pitch, 120 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
PIP® 302-0750-OR/S High Visibility Surveyors Vest, S, Hi-Viz Orange, Polyester Mesh, Zipper Closure, 10 Pockets, ANSI Class: Class 2, ANSI 107 Class 2 Type R2
Ideal for construction, municipalities, shipyards, and anywhere hi-visibility apparel is necessary.
Gates® Power Transmission Super HC® PowerBand® 3/3V630 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 63 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Dodge® 126174 211 Medium Duty Non-Expansion Single Lip Flanged Cartridge Ball Bearing Unit, 1-15/16 in Dia Bore, 5.38 in L Bolt Center-to-Center, 5.38 in Dia Bolt Circle, 4-Bolt Base/Piloted Flange Mount, 6.38 in OAL/Dia
Dodge® 126174 211 Medium Duty Non-Expansion Single Lip Flanged Cartridge Ball Bearing Unit, 1-15/16 in Dia Bore, 5.38 in L Bolt Center-to-Center, 5.38 in Dia Bolt Circle, 4-Bolt Base/Piloted Flange Mount, 6.38 in OAL/Dia
