Gates® Power Transmission AX41 Tri-Power® 9012 Cogged Heavy Duty V-Belt, 1/2 in W Top, 43 in L Outside, 5/16 in THK, AX Section, EPDM
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
-
BrandGates® Power Transmission
-
UPC072053631470
-
Manufacturer Part NumberAX41
-
CountryUSA
-
Temperature Range-70 to 250 deg F
-
Thickness5/16 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialPolyester
-
ColorBlack
-
TypeCogged Heavy Duty
-
Section SizeAX
-
SeriesTri-Power® 9012
-
Number of Ribs1
-
Outside Length43 in
- Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Static conductive
- Patented ethylene material construction
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number90122041
-
Package DescriptionEACH
-
WarrantyLimited
-
Warranty Information
-
Catalog
Recently Viewed
Gates® Power Transmission AX41 Tri-Power® 9012 Cogged Heavy Duty V-Belt, 1/2 in W Top, 43 in L Outside, 5/16 in THK, AX Section, EPDM
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
Gates® Power Transmission AX19 9012 V-Belt Belt, AX Section, 0.48 in W Top, 21 in L Outside, 0.35 in THK, EPDM
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
Gates® Power Transmission Hi-Power® II B108 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 111 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Hi-Power® II B148 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 151 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Hi-Power® II B152 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 155 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
