Milwaukee® 5192 Die Grinder, 2 in Dia Wheel, 21000 rpm Speed, 120 VAC/VDC, For Wheel: Type 2, ON/OFF Toggle/Lock-On Switch
Grinding in tight places around irregular surfaces is the specialty of this Milwaukee die grinder. The 5192 comes with 1/4 in. collet but will accept 1/8 in. collet as well. A full array of mounted points allows you to grind many shapes and diameters. At 21,000 RPM with a 4.5 amp motor, this tool means business. A maximum 2 in. reinforced wheel or 1-5/8 in. non-reinforced wheel can be attached to this versatile grinder for deburring and shaping. On-off toggle switch, flip on and go to work.
-
BrandMilwaukee®
-
UPC045242021505
-
Manufacturer Part Number5192
-
CountryUSA|Canada
-
Tool/KitBare Tool
-
For Wheel TypeType 2
-
Collet Capacity1/4 in, 1/8 in
-
ColorBlack/Gray/Red
-
Voltage Rating120 V AC/DC
-
Control TypeSpindle Lock
-
Cord Type8 ft Fixed
-
Wheel Diameter2 in
-
Amperage Rating4.5 A
-
Housing MaterialGlass Reinforced Nylon
-
Dimensions13-1/2 in
-
Speed21000 rpm
-
Switch TypeON/OFF Toggle/Lock-On
- Heavy duty 4.5 A Milwaukee® motor delivers 21000 rpm for optimal performance
- Strong, lightweight, glass reinforced nylon motor housings and handles
- Armature dynamically balanced for smooth, efficient operation
- For mounted wheels and points up to 1-5/8 in and reinforced wheels up to 2 in
- All ball and roller bearings built for endurance
- Versatile chuck - Accepts 1/4 and 1/8 in collets for greater utility
- 8 ft fixed rubber cord - durable construction for longer tool life
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | PD505192 |
| Berkshire eSupply | PD505192 |
-
Alternative Part Number8564796
-
UNSPSC27112704
-
IDEA Index ID8564796
-
Includes11/16 in and 1/2 in Open End Wrench
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 years
-
Owners/User Manual
-
Instruction/Installation Manual
Recently Viewed
Milwaukee® 5192 Die Grinder, 2 in Dia Wheel, 21000 rpm Speed, 120 VAC/VDC, For Wheel: Type 2, ON/OFF Toggle/Lock-On Switch
Grinding in tight places around irregular surfaces is the specialty of this Milwaukee die grinder. The 5192 comes with 1/4 in. collet but will accept 1/8 in. collet as well. A full array of mounted points allows you to grind many shapes and diameters. At 21,000 RPM with a 4.5 amp motor, this tool means business. A maximum 2 in. reinforced wheel or 1-5/8 in. non-reinforced wheel can be attached to this versatile grinder for deburring and shaping. On-off toggle switch, flip on and go to work.
Dichtomatik 75102054 O-Ring, 110 Dash Number, 0.362 in ID x 0.568 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
SIZE-4 ARTIST BRUSHES-JWH972059>
Milwaukee® 5211 Straight Die Grinder, 3 in Dia Wheel, 14500 rpm Speed, 120 VAC/VDC, For Wheel: Type 3, Trigger Lock Switch
A coated spindle housing make this heavy duty, Milwaukee® straight grinder comfortable to hold on to while delivering a full 11 A of power and 14500 rpm equipped with a hinged face plate with wing nut fasteners for easy wheel changes, this tool can accept up to 3 in resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces. An impact absorbing tool rest is provided so that the tool can be set down safely as the wheel coasts to a stop. The spindle is 3/8 in for use with industry standard accessories for the rated diameter capacity.
SIZE 3 ARTIST BRUSH - JWH972077 >
Dichtomatik 75102144 O-Ring, 222 Dash Number, 1.484 in ID x 1.762 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
