Browning® GripBelt® 2351104 Non-Cogged Super V-Belt, A Section, 1/2 in W Top, 23.22 in L Outside, 5/16 in THK, Neoprene
Browning® Classical V-Belts are designed to deliver maximum performance and service life. Classical belts feature single wrap design, which provides greater flexibility when using small diameter sheaves. Classical single wrap V-Belts also have less fabric overlap, which reduces center distance variation and vibration. For energy conscious users, our AX/BX molded notched/cogged V-Belts are up to 3% more efficient than the wrapped designs. Additionally, they are offered in all standard sizes.
-
BrandBrowning®
-
Manufacturer Part Number2351104
-
CountryUSA
-
Temperature Range230 deg F
-
Thickness5/16 in
-
MaterialNeoprene
-
Top Width1/2 in
-
Reinforced MaterialSynthetic Fiber
-
TypeNon-Cogged
-
Section SizeA
-
Number of Ribs1
-
Outside Length23.22 in
- Wrapped construction - Provides smooth quiet operation
- Single fabric design allows greater flexibility
- Wrapped Belts are more tolerant to slipping and misalignment than Raw Edge Belts
- Close Belt tolerance - Browning Belts offer the "Code 1 in Match belt system on all classical and "358 in Belts, allowing easy selection of just one match number for each belt size
- High Tensile Cord - Specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
- Unique design enhances performance and provides increased horsepower capacity in a shorter center drive
- Reduced overlap provides lower vibration and reduced noise during operation
- High strength, synthetic fiber cords carry the horsepower load and minimize stretching
- This ensures tighter than RMA standards
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Wrapped construction - Provides smooth quiet operation
-
Alternative Part NumberA21
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® GripBelt® 2351104 Non-Cogged Super V-Belt, A Section, 1/2 in W Top, 23.22 in L Outside, 5/16 in THK, Neoprene
Browning® Classical V-Belts are designed to deliver maximum performance and service life. Classical belts feature single wrap design, which provides greater flexibility when using small diameter sheaves. Classical single wrap V-Belts also have less fabric overlap, which reduces center distance variation and vibration. For energy conscious users, our AX/BX molded notched/cogged V-Belts are up to 3% more efficient than the wrapped designs. Additionally, they are offered in all standard sizes.
3-HP, ODP, 3-PH, 208-230/460-V, 3600-RPM, 145-T MOTOR - USMD3P1D >
Sharkbite® U772LF Pipe Adapter, 1 in Nominal, CTS x FNPT End Style, Brass, Natural Brass/Polished Chrome, Import
SharkBite's Threaded Adapters are FNPT on one end, and allow the user to connect any appropriately sized SharkBite push-to-connect fitting on the other end. To connect the SharkBite fitting, simply push the copper tube size (CTS) end into the SharkBite fitting. This fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
CF-1/2-S MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
1-12" OD STUD CAM FOLLOWERS-MCGCF11/2S>
Dodge® 370117 First Stage Pinion Gear, 49 Diametral Pitch, 84 Teeth, 0.9 in Dia Pitch
Dodge® 370117 First Stage Pinion Gear, 49 Diametral Pitch, 84 Teeth, 0.9 in Dia Pitch
DeWALT® DW3774-5 High Performance Industrial Grade Jig Saw Blade, 3 in L x 0.3 in W, 18 TPI, Cobalt Steel Cutting Edge, Cobalt Steel/High Carbon Steel Body
Built for speed and precision, DeWALT® T-shank metal cutting jig saw blades feature a unique curved tooth design that minimizes stress points for long blade life and fast cuts. extra-deep gullets quickly eject chips and cobalt steel (bi-metal) packs each blade with extreme durability. T-shank design fits all Bosch and DeWALT® jig saws.
