Gates® Power Transmission Hi-Power® II PowerBand® 3/C112 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 116 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053259384
-
Manufacturer Part Number3/C112
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section SizeC
-
Series9094
-
Number of Ribs3
-
Outside Length116 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number90943112
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II PowerBand® 3/C112 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 116 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Hi-Power® II C173 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 177 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Coilhose® CMF38 Conical Muffler, 3/8 in MPT Port, 11/16 in Hex, 1-9/16 in OAL
Coilhose® CMF38 Conical Muffler, 3/8 in MPT Port, 11/16 in Hex, 1-9/16 in OAL
5" SUCTION HOSE CLAMP - DXNSDBC5 >
MCR Safety DM1219 Dominator™ DM2 Premium Dual Lens Safety Glass, BossMan™ Mirror Duramass® HC, Indoor/Outdoor Clear Mirror Lens, Black, Polycarbonate Frame, ANSI Z87+
This brand is distinguished with application based, stylish design elements and superior coatings for work and play. The Dominator™ 2 series core feature includes wire core independently adjustable nose pads to fit most facial profiles. The Dominator™ 2 glasses are available with MAX3™ scratch-resistant coating which provides three times greater scratch resistance, MAX6™ anti-fog coating which is proven to provide six times greater fog resistance and dissipation, or BOSSMAN™ mirror lens coating. In addition to the core Dominator™ feature, the Dominator™ 2 includes a co-injected brow guard for extra protection and co-injected soft TPR temples to increase comfort. Dominate your day with adjustability, protection and comfort.
Gates® Power Transmission MegaCrimp™ 4G-8FDHORX G25 Straight Hydraulic Coupling, 6.4 mm x M16x1.5 Nominal, Hose x DIN 24 deg Female Cone Swivel End Style, Steel, Import
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
