ARC™ 07440 Buffing Hand Pad, 9 in L, 6 in W W/Dia, Medium Grade, Aluminum Oxide Abrasive
ARC™ 07440 Buffing Hand Pad, 9 in L, 6 in W W/Dia, Medium Grade, Aluminum Oxide Abrasive
-
BrandARC™
-
UPC725909222802
-
Manufacturer Part Number07440
-
CountryUSA
-
GradeMedium
-
Abrasive MaterialAluminum Oxide
-
Length9 in
- Made of nylon fibers, resins and abrasive grains
- 3-dimensional abrasive surface breaks down, exposing new grain for consistent finishing
- May be used wet or dry
- Color coded for easy identification
- Use by hand pad holder or with vibratory sanders
-
UNSPSC31191505
-
Package Description60/CS
Recently Viewed
ARC™ 07440 Buffing Hand Pad, 9 in L, 6 in W W/Dia, Medium Grade, Aluminum Oxide Abrasive
ARC™ 07440 Buffing Hand Pad, 9 in L, 6 in W W/Dia, Medium Grade, Aluminum Oxide Abrasive
Klein® D307-51/2C Slim Long Nose Plier, Knurled Steel Jaw, 1.688 in L x 1/2 in W Jaw, 5-5/8 in OAL, 1/32 in W Tip
The longer nose on these pliers allow for deeper reach into tight spaces. The longer, curved handles provide greater tool control. They are spring-loaded for self-opening action to reduce hand fatigue. Great for intricate electronics work.
Champion XLUB-WAX-2 Multi-Purpose Cutting Fluid, 2 oz Tub, Solid, Amber
Formulated to extend tool life, reduce chip welding and clings to the tool at any angle, including overhead operations. Continuous shield against friction and heat, reducing tool costs and work piece scrap. Provides a close tolerance precision finish. Effective on stainless steel, aluminum and exotic alloys.
Midland Industries 80-001 Dry Standard Pressure Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial
Midland Industries 80-001 Dry Standard Pressure Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial
GAUGE ADAPTORS-ENEGA45GC>
Alemite® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
