Gates® Power Transmission Hi-Power® II B253 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 254 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC770075275190
-
Manufacturer Part NumberB253
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.775 in
-
Section SizeB
-
Series9003
-
Number of Ribs1
-
Outside Length254 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
-
Alternative Part Number90032253
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Hi-Power® II B253 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 254 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
3/16" X 50' OXY/ACET TWIN HOSES - Suitable for use with oxygen-acetylene only - Red hose for acetylene - Green hose for oxygen - Use with acetylene fuel gas only - Resists kinks, heat, weather and solvent
SCOTSEALS-4.500" X 5.50" X .750" NITRILE RUBBER WHEEL END COMPONENT
Dodge® 130355 205 Normal Duty Pillow Block Ball Bearing Unit, 25 mm Dia Bore, 50.8 mm L Bolt Center-to-Center, 36.5 mm Base to Bore Centerline, 76.2 mm OAL x 71.4 mm OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
The McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISC® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
MCR Safety Mechanics Gloves Synthetic leather palm with silicone dots Thermosock® lined with waterproof bladder Keep your hands warm and dry with this Thermosock® lined waterproof option At our jobs, we are often required to multitask. If you're in need of a glove that can withstand the daily wear and tear on your hands, look no further than the MCR Safety mechanics gloves. With these gloves, you'll have the grip, durability, and protection necessary for even the toughest jobs. The 926 glove is designed with a black synthetic leather palm and fingertips, silicone dots, a black terrycloth thumb, neoprene knuckle strap, and a hook and loop wrist closure. Additionally, it's lined with 40-gram Thermosock® to keep your hands warm. The glove also features a hi-visibility green fabric back and is both windproof and waterproof. Keep your hands warm and dry with the 926 glove from MCR Safety.
