Gates® Power Transmission Hi-Power® II B195 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 198 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053205466
-
Manufacturer Part NumberB195
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width21/32 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.775 in
-
Section SizeB
-
Series9003
-
Number of Ribs1
-
Outside Length198 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
-
Alternative Part Number90032195
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Hi-Power® II B195 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 198 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
MasterDrive 6B58SK Type A-1 Groove Sheave, 1/2 to 2-5/8 in Dia Bore, 6.15 in Dia Outside, 6 Grooves, 5.4 in (A)/5.8 in (B) Dia Pitch, 4.75 in W Face
QD Heavy Duty V-Belt Sheaves are designed to be mounted with QD Bushings. The bushings allow easy installation and removal reducing downtime; as well as the versatility and cost savings of being able to use one sheave with a range of different shaft sizes by selecting from the available bushing bore sizes. The QD Bushing ensures a tight grip on the shaft minimizing the risk of slippage, and in many cases can be reverse mounted when space constraints require.
MasterDrive L075-20MM L075 Standard Jaw Coupling, 20 mm Dia Bore, 0.82 in L Through Bore, 1.75 in Dia Hub, Powdered Metal
Jaw Couplings provide standard shaft-to-shaft connection for general duty applications. Two hubs are used in pair with an elastomer or bronze element (spider), each sold seperately. The element eliminates metal-to-metal contact and acts as a shock absorber. The design is fail-safe in that it will perform if the element fails.
OSCILLATING GARDEN HOSE SPRINKLER-JWH724318 >
MORSE® 22592 1680 Taper Pin Reamer, #5 Taper Pin, 0.2409 in Dia Small End, Straight Flute, Straight Shank
.875" X 1.497" X .313" RADIAL SHAFT DOUBLE LIP, SOLID OIL SEAL. FLUORO RUBBER MATERIAL, CRWA5 DESIGN
