Gates® Power Transmission PowerGrip® 420H150 Heavy Timing Belt, 1-1/2 in W, 42 in OAL, 1/2 in Pitch, 84 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566352
-
Manufacturer Part Number420H150
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width1-1/2 in
-
Series9257
-
Number of Teeth84
-
Overall Length42 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573306
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® 420H150 Heavy Timing Belt, 1-1/2 in W, 42 in OAL, 1/2 in Pitch, 84 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
HCI Preferred Supplier 250362 Hydraulic Elbow, 9/16-18 x 1/8 in Nominal, 37 deg SAE Male JIC Flare, Steel
HCI Preferred Supplier 250362 Hydraulic Elbow, 9/16-18 x 1/8 in Nominal, 37 deg SAE Male JIC Flare, Steel
Gates® Power Transmission Super HC® 5V1900 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 190 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Loctite 565 white thread sealant is compatible with metal materials with a 24 hr cure time. Delivers great performance with a shear strength of 145 psi and tensile strength of 25 psi. Minimum to maximum operating temperatures are -65 F to +300 F. Comes in a 6 ml Tube. This thread sealant is packaged 6 ml per inner.
Gates® Power Transmission PowerGrip® Twin Power® TP600L050 Light Timing Belt, 1/2 in W, 60 in OAL, 3/8 in Pitch, 160 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
Gates® Power Transmission Super HC® PowerBand® 3/3V670 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 67 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
