Gates® Power Transmission PowerGrip® GT®3 355-5MGT-09 Synchronous Belt, 9 mm W, 355 mm OAL, 5 mm Pitch, 71 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
-
BrandGates® Power Transmission
-
UPC770075591573
-
Manufacturer Part Number355-5MGT-09
-
CountryUSA
-
Pitch5 mm
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
Width9 mm
-
Series9400
-
Number of Teeth71
-
Overall Length355 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- PowerGrip® GT®3 exceeds HTD® in tooth ratchet resistance
- Gates® patented tooth profile is designed for use with a specific sprocket groove profile
- The sprocket groove-belt tooth combinations increases capacity, while improving registration
- Eliminates lubrication and re-tensioning to reduce maintenance and labor as compared to roller chain drives
- Neoprene body provides protection against grime, grease, oil and moisture
- PowerGrip® GT®3 belt and GT®2 sprocket combinations match or exceed the positional accuracy of PowerGrip® timing belt/pulley systems
-
Alternative Part Number94006071
-
UNSPSC26111811
-
Package DescriptionEACH
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®3 355-5MGT-09 Synchronous Belt, 9 mm W, 355 mm OAL, 5 mm Pitch, 71 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
NSK 6304DDUC3 Medium Deep Groove Ball Bearing, 20 mm Dia Bore, 52 mm OD, 1 Row, 15 mm W, 16700 N Dynamic/7900 N Static Load
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
NSK 608Z Extra Small Deep Groove Ball Bearing, 8 mm Dia Bore, 22 mm OD, 1 Row, 7 mm W, 3300 N Dynamic/1370 N Static Load
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
Gates® Power Transmission PowerGrip® GT®3 480-8MGT-85 Synchronous Belt, 85 mm W, 480 mm OAL, 8 mm Pitch, 60 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 800-8MGT-85 Synchronous Belt, 85 mm W, 800 mm OAL, 8 mm Pitch, 100 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
NSK 6305VV Medium Deep Groove Ball Bearing, 25 mm Dia Bore, 62 mm OD, 1 Row, 17 mm W, 21600 N Dynamic/11200 N Static Load
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
