Gates® Power Transmission PowerGrip® GT®3 2400-8MGT-20 Synchronous Belt, 20 mm W, 2400 mm OAL, 8 mm Pitch, 300 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
-
BrandGates® Power Transmission
-
UPC770075790808
-
Manufacturer Part Number2400-8MGT-20
-
CountryUSA
-
Pitch8 mm
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
Width20 mm
-
Series9356
-
Number of Teeth300
-
Overall Length2400 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Gates® patented tooth profile is designed for use with a specific sprocket groove profile
- The sprocket groove-belt tooth combinations increases capacity, while improving registration
- Eliminates lubrication and re-tensioning to reduce maintenance and labor as compared to roller chain drives
- A single twist cord helps prevent the belt from moving downward on vertical shaft ACHE applications
- Neoprene body provides protection against grime, grease, oil and moisture
- PowerGrip® GT®3 has more tooth ratchet resistance than HTD®
-
Alternative Part Number95790069
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsISO 9563
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®3 2400-8MGT-20 Synchronous Belt, 20 mm W, 2400 mm OAL, 8 mm Pitch, 300 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission Poly Chain® GT® Carbon™ 8MGT-1792-62 Synchronous Belt, 62 mm W, 1792 mm OAL, 8 mm Pitch, 224 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates® Poly Chain® GT® Carbon™ drive system instead of roller chain in your next power transmission application. The patented use of Carbon™ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates® Poly Chain® GT®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Gates® Power Transmission Poly Chain® GT® Carbon™ 8MGT-4000-12 Synchronous Belt, 12 mm W, 4000 mm OAL, 8 mm Pitch, 500 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates® Poly Chain® GT® Carbon™ drive system instead of roller chain in your next power transmission application. The patented use of Carbon™ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates® Poly Chain® GT®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Gates® Power Transmission Poly Chain® GT® Carbon™ 8MGT-4480-21 Synchronous Belt, 21 mm W, 4480 mm OAL, 8 mm Pitch, 560 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates® Poly Chain® GT® Carbon™ drive system instead of roller chain in your next power transmission application. The patented use of Carbon™ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates® Poly Chain® GT®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1760-8MGT-30 9232 Synchronous Belt, 220 Teeth, 8 mm Pitch, 1760 mm OAL, 30 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission PowerGrip® GT®3 2200-8MGT-12 Synchronous Belt, 12 mm W, 2200 mm OAL, 8 mm Pitch, 275 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
