Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2000-8MGT-20 9232 Synchronous Belt, 250 Teeth, 8 mm Pitch, 2000 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
-
BrandGates® Power Transmission
-
UPC072053611571
-
Manufacturer Part NumberTP2000-8MGT-20
-
CountryUSA
-
Pitch8 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter59.74 mm
-
Width20 mm
-
Series9232
-
Number of Teeth250
-
Overall Length2000 mm
- Fiberglass tensile cord provides high-strength, excellent flex life and high resistance to elongation
- Belt capacity is equal to standard single-sided PowerGrip® GT®2 belts
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
- Substantially quieter operation enables wide application usage
-
Alternative Part Number92320065
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2000-8MGT-20 9232 Synchronous Belt, 250 Teeth, 8 mm Pitch, 2000 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission Poly Chain® HTD® PC2100-14M-85 Synchronous Belt, 85 mm W, 2100 mm OAL, 14 mm Pitch, 150 Teeth, Polyurethane
Gates original HTD® tooth profile combined with Poly Chain® belt construction.
Gates® Power Transmission PowerGrip® GT®3 2000-8MGT-50 Synchronous Belt, 50 mm W, 2000 mm OAL, 8 mm Pitch, 250 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
O,D, TOP 3.45, OD BOTTOM-2.921 THREAD SIZE 3/4-16, BY-PASS VALVE SETTING-PSI IS 30. PRINCIPAL APPLICATION IS FOR VARIOUS AUDI (FOR TURBO-CHARGER) (80-88), LASTEC LAWN EQUIPMENT
-WIX51288 >
FILTERS-WIX57035 >
Krylon® Sprayon™ SC0740000 WL™740 Galvanizing Zinc Rich Compound, 14 oz Container, Liquid Form, Gray
Sprayon™ WL™740 zinc rich galvanizing compound is a high performance primer containing 97% pure zinc dust pigment blended with epoxy resin. Stops rust by electro-chemical action on steel or galvanized coatings. The self-sacrificing zinc protects the base metal, preserving strength and prevents rust creepage when the area is penetrated or scratched. This compound fuses zinc to the metal substrate and delivers protection against corrosion equal to or better than hot dipped galvanizing.
