Gates® Power Transmission Poly Chain® GT® Carbon™ 14MGT-3136-20 Synchronous Belt, 20 mm W, 3136 mm OAL, 14 mm Pitch, 224 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates® Poly Chain® GT® Carbon™ drive system instead of roller chain in your next power transmission application. The patented use of Carbon™ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates® Poly Chain® GT®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
-
BrandGates® Power Transmission
-
UPC072053451450
-
Manufacturer Part Number14MGT-3136-20
-
CountryUSA
-
Pitch14 mm
-
Temperature Range-65 to 185 deg F
-
MaterialPolyurethane
-
Tooth ProfileCurvilinear
-
Reinforced MaterialCarbon
-
Minimum Pulley Diameter139.81 mm
-
Width20 mm
-
Series9274
-
Number of Teeth224
-
Overall Length3136 mm
- Durable polyurethane construction resists chemicals, oil, pollutants and abrasion
- Nylon tooth facing reduces friction and eliminates the need for lubrication
- Maintenance-free, clean solution for roller chain drive conversion
- Significantly reduces maintenance cost
- Equivalent capacity to roller chain drives in the same width
- Easy rust-free wash-down with Gates® stainless steel hardware
- Fast drive conversion payback
- Quieter than roller chain drives
- New construction provides up to 55% more low-speed capacity than the original PCGT construction and 30% more than PCGT2
- Gates® curvilinear tooth profile provides high shear strength, noise reduction and improved load carrying capacity
- Robust carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity, while absorbing shock and surge loads
-
Alternative Part Number92744224
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Poly Chain® GT® Carbon™ 14MGT-3136-20 Synchronous Belt, 20 mm W, 3136 mm OAL, 14 mm Pitch, 224 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates® Poly Chain® GT® Carbon™ drive system instead of roller chain in your next power transmission application. The patented use of Carbon™ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates® Poly Chain® GT®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1890-14MGT-40 9232 Synchronous Belt, 135 Teeth, 14 mm Pitch, 1890 mm OAL, 40 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission PowerGrip® GT®3 2450-14MGT-115 Synchronous Belt, 115 mm W, 2450 mm OAL, 14 mm Pitch, 175 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission Poly Chain® GT® Carbon™ 14MGT-2520-37 Synchronous Belt, 37 mm W, 2520 mm OAL, 14 mm Pitch, 180 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates® Poly Chain® GT® Carbon™ drive system instead of roller chain in your next power transmission application. The patented use of Carbon™ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates® Poly Chain® GT®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1600-8MGT-50 9232 Synchronous Belt, 200 Teeth, 8 mm Pitch, 1600 mm OAL, 50 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ belts are designed to transmit up to 100% of its load carrying capacity on either side of the belt, or be used in applications that transmit fractional loads to both sides. This enables synchronization from both drive surfaces. Additionally, the belt is designed to limit noise emissions, enabling the belts to be employed in a variety of precision and public-facing applications, from robotics and medical devices to vending and currency handling machinery. GT™ stands for Gates® tooth, our proprietary modified curvilinear belt tooth profile. In PowerGrip™ GT™2 Twin Power™ belts, the fiberglass tensile cords and neoprene body are completed with a nylon tooth cover that provides high resistance to tooth jump for non-slip usage and exceptional belt life.
Gates® Power Transmission Poly Chain® GT® Carbon™ 14MGT-2730-37 Synchronous Belt, 37 mm W, 2730 mm OAL, 14 mm Pitch, 195 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates® Poly Chain® GT® Carbon™ drive system instead of roller chain in your next power transmission application. The patented use of Carbon™ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates® Poly Chain® GT®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
