IKO BA108ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 5/8 in Dia Bore, 13/16 in OD, 1 Row, 1/2 in W, 5420 N Dynamic/7310 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
-
BrandIKO
-
Manufacturer Part NumberBA108ZOH
-
CountryUSA
-
Load Capacity5420 N Dynamic/7310 N Static
-
Maximum Speed25000 rpm
-
Closure TypeOpen
-
TypeCaged Shell Standard
-
Width1/2 in
-
SeriesBA-Z Inch Series
-
Number of Rows1
-
Bearing MaterialChromium Molybdenum Steel
-
Outside Diameter13/16 in
-
Bore Diameter5/8 in
- Caged bearings for high-speed rotation feature precise needle rollers, accurately guided by a cage and thrust rings
-
UNSPSC31171512
-
Catalog
Recently Viewed
IKO BA108ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 5/8 in Dia Bore, 13/16 in OD, 1 Row, 1/2 in W, 5420 N Dynamic/7310 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Jones Stephensâ„¢ D06100 Dielectric Union, 1 in, FNPT x Solder, Forged Steel
Jones Stephensâ„¢ D06100 Dielectric Union, 1 in, FNPT x Solder, Forged Steel
Worms and worm gears are used to power right angle, non-intersecting shafts. In normal applications the worm gear is driven by the worm. The most popular use of worms and worm gears is in applications where high ratio speed reduction is desired in a relatively limited space. They are also used in applications where high resistance to the worm gear shaft reversing and driving back through the worm is desired.
BBI 830227 Hex Bolt/Screw, M8x1.25, 50 mm L Under Head, A2-70 Grade, Stainless Steel
BBI 830227 Hex Bolt/Screw, M8x1.25, 50 mm L Under Head, A2-70 Grade, Stainless Steel
10.8-VOLT DC CORDLESS BATTERY-MAK6320341>
Koyo 1313 Caged Cylindrical Bore Medium Self-Aligning Ball Bearing, 65 mm Dia Bore, 140 mm OD, 2 Rows, 33 mm W, 61.7 kN Dynamic/22.9 kN Static Load
Self-aligning ball bearings have a spherical outer ring raceway, the center of whose curvature meets that of the bearing itself, so that the inner ring, balls and cage continue to rotate, aligning themselves if they have become misaligned within design limits.
