McGill® 0001000000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 5/8 in ID x 0.8743 in OD, 1.01 in OAW, For Use With CAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 14, GR 14 SS, MR 14, MR 14 SS Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000073
-
Manufacturer Part Number0001000000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter5/8 in
-
Outside Diameter0.8743 in
-
Bore TypeRound/Spherical
-
Overall Width1.01 in
-
Suitable For Use WithCAGEROL® MR RS, MR RSS, MR S, MR SRS, GR 14, GR 14 SS, MR 14, MR 14 SS Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 10
-
UNSPSC31171500
-
Package DescriptionEACH
-
Specification Sheet
-
Catalog
Recently Viewed
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
BBI 532086 Partially Threaded Round Socket Cap Screw, M6x1, 35 mm OAL, Alloy Steel, 12.9 Grade
BBI 532086 Partially Threaded Round Socket Cap Screw, M6x1, 35 mm OAL, Alloy Steel, 12.9 Grade
Jacobs® 14451 34-33C Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 33JT Mounting, Plain Bearing, K3C
Jacobs® 14451 34-33C Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 33JT Mounting, Plain Bearing, K3C
JASON 410H075 SYNCHRONOUS BELT, 75 " PITCH; 41" PITCH LENGTH; 3/4" BELT WIDTH. 33 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS410H075 >
40-B-19-F-1-1/4 19 Tooth Sprockets For #40
19 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B19F11/4 >
DOUBLE SEALED BALL BEARING-NTN6200LL >
