McGill® 0002030000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-1/4 in ID x 1.499 in OD, 1.01 in OAW, For Use With GUIDEROL® GR 24 N, CAGEROL® MR 24 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000363
-
Manufacturer Part Number0002030000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeNarrow
-
SeriesMI Series
-
Inside Diameter1-1/4 in
-
Outside Diameter1.499 in
-
Bore TypeRound/Spherical
-
Overall Width1.01 in
-
Suitable For Use WithGUIDEROL® GR 24 N, CAGEROL® MR 24 N Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 20 N
-
UNSPSC31171500
-
Standards/ApprovalsMS 51962-15
-
Specification Sheet
-
Catalog
Recently Viewed
McGill® 0002030000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 1-1/4 in ID x 1.499 in OD, 1.01 in OAW, For Use With GUIDEROL® GR 24 N, CAGEROL® MR 24 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Armstrong® 20-894 Impact Socket Set, ASME B107.2:2002, Imperial, 6 Points, 1/2 in Drive, 11 Pieces, Included Socket Size: 1/2 to 1-1/8 in
Armstrong® 20-894 Impact Socket Set, ASME B107.2:2002, Imperial, 6 Points, 1/2 in Drive, 11 Pieces, Included Socket Size: 1/2 to 1-1/8 in
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
FLAME RESISTANT-WHIPCORD/30" WELDING JACKETS-RIIFW230CXXL >
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
3.000" X 3.751" X .375" RADIAL SHAFT SEAL WITH METAL CASE AND SKF WAVE LIP CRW BLACK 3D
