Crosby® 1019515 Anchor Shackle, 4.75 ton Load, 3/4 in, 0.89 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019515 Anchor Shackle, 4.75 ton Load, 3/4 in, 0.89 in Dia Bolt Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1019515
-
CountryUSA
-
Load Capacity4.75 ton
-
FinishHot Dipped Galvanized
-
SeriesG-2130
-
Inner Length2.81 in
-
Inner Width2 in
-
Size3/4 in
-
Opening Size1-1/4 in
-
Body MaterialCarbon Steel
-
Overall Length4.97 in
-
Overall Width4.15 in
-
Eye Outer Size1.81 in
-
Pin Diameter0.89 in
-
Pin MaterialAlloy
-
Pin TypeBolt
- Working load limit and grade 6 permanently shown on every shackle
- Approved for use at -40 to 400 deg F
- 3.1 Certification as standard available for charpy and statistical proof test from 3.25 ton up to 25 tons to DNV2.7-1 and EN13889
- Crosby® 3.25 ton through 25 ton G2130OC anchor shackles are type approved to DNV certification notes 2.7-1 offshore containers
- The Crosby® shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- All other 2130 shackles can meet charpy requirements of 42 J average at -4 deg F when requested at time of order
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV2.7-1 Certified|EN13889|Federal Spec RR-C271F|Type IVA|Grade A|Class 3
-
Catalog
Recently Viewed
Crosby® 1019515 Anchor Shackle, 4.75 ton Load, 3/4 in, 0.89 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019515 Anchor Shackle, 4.75 ton Load, 3/4 in, 0.89 in Dia Bolt Pin, Hot Dipped Galvanized
Peerless® Peer-Lift® 8453180 Coupling Link, 5/16 in Trade, 4500 lb Load, 80 Grade, Alloy Steel, Black Enamel
Peer-Lift® mechanical coupling links are an essential component of mechanically coupled slings. Used to assemble chain legs to the master link and/or attach eye type fittings. Tested at twice the working load limit, this grade 80 coupling link will provide a safe and reliable sling assembly. Peer-Lift® mechanical coupling links an industry recognized product that meets or exceeds ASTM A952 and OSHA 1910 standards.
United Abrasives-SAIT 27360 Mounted Point, W220 Point, 1 in Dia x 1 in L Head, 1/4 in Dia Shank
United Abrasives-SAIT 27360 Mounted Point, W220 Point, 1 in Dia x 1 in L Head, 1/4 in Dia Shank
Champion CT5-1-1/2 CT5 Hole Cutter, 1-1/2 in Dia, 3/16 in D Cutting, Carbide Cutting Edge
Champion CT5-1-1/2 CT5 Hole Cutter, 1-1/2 in Dia, 3/16 in D Cutting, Carbide Cutting Edge
Milwaukee® MX4™ 48-20-7256 4-Cutter Rotary Hammer Drill Bit, 1-1/8 in Drill Bit, 25/64 in SDS Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
The MILWAUKEE® SDS Plus 4-Cutter MX4™ 1-1/8" X 16" X 18" Drill Bits with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
MORSE® 11412 1330 General Purpose Jobber Length Drill Bit, 9/64 in Drill - Fraction, 0.1406 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11412 1330 General Purpose Jobber Length Drill Bit, 9/64 in Drill - Fraction, 0.1406 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
