Dodge® 041868 Type USAF Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 11.63 to 13.13 in L Bolt Center-to-Center, 15.36 in OAL x 8-3/4 in OAH
Dodge® 041868 Type USAF Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 11.63 to 13.13 in L Bolt Center-to-Center, 15.36 in OAL x 8-3/4 in OAH
-
BrandDodge®
-
UPC782475021086
-
Manufacturer Part Number041868
-
CountryUSA
-
Load Capacity96500 lb Dynamic/106000 lb Static
-
Locking DeviceAdapter Mounted
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed2200 rpm
-
TypeType USAF
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTriple-Tect™
-
Bolt Center-to-Center Length11.63 to 13.13 in
-
Bore Diameter3-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height8-3/4 in
-
Overall Length15.36 in
- Cast-in dimples locate drill holes for lube fittings, vents, sensors and mounting modifications
- Housing base is threaded to accept four grade five cap bolts for added strength that match base bolts for one-wrench installation
- Standard housings have two oversized drains adaptable to circulating oil systems
- Pry slots allow easy separation of the pillow block
- Cap bolts match base bolts for one-wrench installation
- USAF housings also match standard dimensions to assure interchangeability
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100942042 |
| Applied Industrial Technologies | 100942042 |
-
Alternative Part NumberP2B520-USAF-307TT
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Dodge® 041868 Type USAF Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 11.63 to 13.13 in L Bolt Center-to-Center, 15.36 in OAL x 8-3/4 in OAH
Dodge® 041868 Type USAF Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 11.63 to 13.13 in L Bolt Center-to-Center, 15.36 in OAL x 8-3/4 in OAH
Dodge® 070273 Type S2000 Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 4.81 to 5.2 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6.88 in OAL x 3.88 in OAH
Dodge® 070273 Type S2000 Pillow Block Roller Bearing Unit, 1-7/16 in Dia Bore, 4.81 to 5.2 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6.88 in OAL x 3.88 in OAH
Dodge® 069401 Imperial Pillow Block Roller Bearing Unit, 1-3/16 in Dia Bore, 4.81 to 5.2 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6.8 in OAL x 3.88 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
IMPORT OIL SEALS-IMS11515>
2.500" X 3.500" X .375" FLUORO RUBBER DUAL LIP SHAFT SEAL, FLOUROCARBON RUBBER LIP MATERIAL, SKF WAVE SEAL.
Dodge® 023386 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
Dodge® 023386 203 Double Interlock Pillow Block Roller Bearing Unit, 2-3/16 in Dia Bore, 8.06 to 9.25 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 6.52 in OAH
